{"title":"Multipoint Lock Extension Rods","description":null,"products":[{"product_id":"hoppe-hls-9000-top-extension-with-tongue-automatic","title":"HOPPE top extension with tongue, automatic","description":"\u003cp\u003eThis lock extension with tongue is a section of the operating drive rail. It attaches to the gear to reach the height of the door and carries the upper locking points. HOPPE calls this the Extension. Pick by part number or locking point height, measured up from the handle center. Match the 5\/8\" (16 mm) faceplate width. Combine it with the gear for a complete lock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e 65-1\/4\" (1657 mm) to 98-3\/4\" (2508 mm) from the door bottom, by version (HOPPE: 29-1\/4\" (743 mm) to 62-3\/4\" (1594 mm) above the handle center)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut-off:\u003c\/strong\u003e How much can be cut off the top when fitting: 7-11\/16\" (195 mm), 14-9\/16\" (370 mm) or 22-7\/16\" (570 mm) on 3 versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e Tongue, on the upper part of the faceplate strip above the gear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Automatic on every version on this page\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm), measured across the face of the metal strip on the door edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e Fits HOPPE HLS 9000 on swing (hinged) doors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Combine with the gear for a complete lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eLook at the upper part of the faceplate strip above the gear. The locking point on it is a tongue on this page. Rollers, a swing hook, a round bolt or a shootbolt mean a different page. Check that your lock is automatic: the locking points throw when the door closes.\u003c\/li\u003e\n\u003cli\u003eMeasure across the face of the metal strip on the door edge. Match 5\/8\" (16 mm).\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the tongue: 65-1\/4\" (1657 mm), 73-3\/16\" (1859 mm), 82-15\/16\" (2107 mm) or 98-3\/4\" (2508 mm). Subtract the 36\" (914 mm) handle height to get HOPPE's figure.\u003c\/li\u003e\n\u003cli\u003eMaximum cut-off is how much can be cut off the top when fitting, not a measurement. 8778587 and 8778591 both list 37-3\/16\" (945 mm); tell them apart by part number.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe locking points on the strip above the gear are rollers, not a tongue: HOPPE HLS® 9000 Automatic Two Roller – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe locking point on the strip above the gear is a swing hook: HOPPE HLS® 9000 Swing Hook – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe locking point on the strip above the gear is a shootbolt: HOPPE HLS® 9000 Shootbolt – Top Extension\u003c\/li\u003e\n\u003cli\u003eYour lock is manual (you lift the handle to throw the locking points): HOPPE HLS® 9000 Tongue – Top Extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. The HOPPE HLS 9000 lock extension with tongue is one section of the operating drive rail. Combine it with the gear for a complete lock.\u003c\/p\u003e\u003ch4\u003eWhat is the metal strip above my door handle called?\u003c\/h4\u003e\u003cp\u003eThe upper part of the faceplate strip above the gear, with the top locking points on it, is the extension. HOPPE calls it the Extension. On an automatic HLS 9000 lock with a tongue, the part is the HOPPE HLS 9000 lock extension with tongue.\u003c\/p\u003e\u003ch4\u003eHow do I measure the locking point height?\u003c\/h4\u003e\u003cp\u003eMeasure from the door bottom up to the tongue, then subtract the 36\" (914 mm) handle height. HOPPE lists 29-1\/4\" (743 mm), 37-3\/16\" (945 mm), 46-15\/16\" (1193 mm) or 62-3\/4\" (1594 mm) above the handle center, by version.\u003c\/p\u003e\u003ch4\u003eWhat faceplate width does the tongue extension have?\u003c\/h4\u003e\u003cp\u003eThe HOPPE HLS 9000 lock extension with tongue has a 5\/8\" (16 mm) faceplate on every version. Measure across the face of the metal strip on the door edge.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"41-1\/8\" (1045 mm) – 1 tongue at 29-1\/4\" above handle","offer_id":50751510085829,"sku":"8778579","price":69.99,"currency_code":"USD","in_stock":true},{"title":"48-1\/16\" (1220 mm) – 1 tongue at 29-1\/4\" above handle","offer_id":50751510118597,"sku":"8778583","price":89.99,"currency_code":"USD","in_stock":true},{"title":"54-15\/16\" (1395 mm) – 1 tongue at 37-3\/16\" above handle","offer_id":50751510151365,"sku":"8778587","price":99.99,"currency_code":"USD","in_stock":true},{"title":"61-13\/16\" (1570 mm) – 1 tongue at 37-3\/16\" above handle","offer_id":50751510184133,"sku":"8778591","price":89.99,"currency_code":"USD","in_stock":true},{"title":"68-11\/16\" (1745 mm) – 1 tongue at 46-15\/16\" above handle","offer_id":50751510216901,"sku":"8778595","price":119.99,"currency_code":"USD","in_stock":true},{"title":"89-3\/8\" (2270 mm) – 1 tongue at 62-3\/4\" above handle","offer_id":50751510249669,"sku":"8778607","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_2c31eecc-e389-41c9-97e5-4f1c48dc4e56.png?v=1794081220"},{"product_id":"hoppe-hls-9000-top-extension-with-roller-automatic","title":"HOPPE top extension with roller, automatic","description":"\u003cp\u003eThis top extension with roller is a section of the operating drive rail. It attaches to the gear to reach the height of the door and carries the upper locking points. HOPPE calls this the Extension. Pick the version by length and locking point height, and check the 5\/8\" (16 mm) faceplate width. Combine the top extension with the gear for a complete lock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e By version: 41-1\/8\" (1045 mm), 48-1\/16\" (1220 mm), 54-15\/16\" (1395 mm), 61-13\/16\" (1570 mm) or 68-11\/16\" (1745 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e By version: 64-3\/4\" (1644 mm) to 86-9\/16\" (2199 mm) from the door bottom (HOPPE: 28-3\/4\" (730 mm) to 50-9\/16\" (1285 mm) above the handle center)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut-off:\u003c\/strong\u003e By version: 8-11\/16\" (221 mm) to 16-9\/16\" (421 mm). See the version table for each part number.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000, for a swing (hinged) door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Automatic: the locking points throw when the door closes. One roller on the extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm) across the face of the metal strip on the door edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Combine the top extension with the gear for a complete lock. A cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eLook at the upper part of the faceplate strip above the gear. That is the extension. On this page it carries one roller, and the lock is automatic: the locking points throw when the door closes.\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the roller: 64-3\/4\" (1644 mm) to 86-9\/16\" (2199 mm). Subtract the 36\" (914 mm) handle height to get HOPPE's figure, 28-3\/4\" (730 mm) to 50-9\/16\" (1285 mm).\u003c\/li\u003e\n\u003cli\u003eLength is the overall length of the extension: 41-1\/8\" (1045 mm) to 68-11\/16\" (1745 mm). A fitted extension may have been cut shorter at the top, so it can measure less.\u003c\/li\u003e\n\u003cli\u003eMeasure across the face of the metal strip on the door edge. Check that it is 5\/8\" (16 mm).\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour HLS 9000 lock with rollers is manual (you lift the handle to throw the locking points): HOPPE HLS® 9000 Two Roller – Top Extension or HOPPE HLS® 9000 Four Roller – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe top locking points on your extension are tongues, not rollers: HOPPE HLS® 9000 Automatic Tongue – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe top locking points on your extension are swing hooks, not rollers: HOPPE HLS® 9000 Swing Hook – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe top locking point on your extension is a shootbolt, not a roller: HOPPE HLS® 9000 Shootbolt – Top Extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eThe HOPPE HLS 9000 top extension with roller is not the whole lock. It is one section of the operating drive rail. Combine the top extension with the gear for a complete lock. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eWhat is the long strip above the lock body with rollers on it called?\u003c\/h4\u003e\u003cp\u003eThe upper part of the faceplate strip above the gear, with the top locking points on it, is a top extension. HOPPE calls it an Extension. Other names are drive rail extension and top lock section.\u003c\/p\u003e\u003ch4\u003eHow do I measure the locking point height?\u003c\/h4\u003e\u003cp\u003eMeasure from the door bottom up to the roller, then subtract the 36\" (914 mm) handle height. HOPPE lists 28-3\/4\" (730 mm) to 50-9\/16\" (1285 mm) above the handle center, by version. Match your value to the version table.\u003c\/p\u003e\u003ch4\u003eWhich length of HLS 9000 top extension do I need?\u003c\/h4\u003e\u003cp\u003eThe HOPPE HLS 9000 top extension with roller comes in lengths from 41-1\/8\" (1045 mm) to 68-11\/16\" (1745 mm). Match the overall length of your old extension to the value in the version table.\u003c\/p\u003e\u003ch4\u003eTwo versions have the same locking point height. How do I choose?\u003c\/h4\u003e\u003cp\u003eTwo HOPPE HLS 9000 top extensions with roller have a locking point height of 50-9\/16\" (1285 mm): 8778527 at 61-13\/16\" (1570 mm) and 8778531 at 68-11\/16\" (1745 mm) long. Pick between them by length.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"41-1\/8\" (1045 mm) – 1 roller at 28-3\/4\" above handle","offer_id":50751514017989,"sku":"8778515","price":69.99,"currency_code":"USD","in_stock":true},{"title":"48-1\/16\" (1220 mm) – 1 roller at 36-5\/8\" above handle","offer_id":50751514050757,"sku":"8778519","price":99.99,"currency_code":"USD","in_stock":true},{"title":"54-15\/16\" (1395 mm) – 1 roller at 44-11\/16\" above handle","offer_id":50751514083525,"sku":"8778523","price":109.99,"currency_code":"USD","in_stock":true},{"title":"61-13\/16\" (1570 mm) – 1 roller at 50-9\/16\" above handle","offer_id":50751514116293,"sku":"8778527","price":79.99,"currency_code":"USD","in_stock":true},{"title":"68-11\/16\" (1745 mm) – 1 roller at 50-9\/16\" above handle","offer_id":50751514149061,"sku":"8778531","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_2ae7e48a-50ef-4ab2-86d9-6816d8f32410.png?v=1794081240"},{"product_id":"hoppe-hls-9000-top-extension-with-2-rollers","title":"HOPPE top extension with 2 rollers, manual","description":"\u003cp\u003eThis lock extension with roller is a section of the operating drive rail that attaches to the gear to reach the height of the door and carry the upper locking points. HOPPE calls this the Extension. Pick by length, from 41-1\/8\" (1045 mm) to 89-3\/8\" (2270 mm), and check the locking point height. Combine the extension with the gear for a complete lock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 41-1\/8\" (1045 mm) to 89-3\/8\" (2270 mm) by version, the overall length as printed in HOPPE's table\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e 51-3\/4\" (1314 mm) to 75-3\/8\" (1914 mm) from the door bottom to the lower roller (HOPPE: 15-3\/4\" (400 mm) to 39-3\/8\" (1000 mm) above the handle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e Two rollers on the extension, on every version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm), measured across the face of the metal strip on the door edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000, for a swing (hinged) door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Combine the extension with the gear for a complete lock. A cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck the locking points on the upper part of the faceplate strip above the gear. This page has two rollers on the extension. One roller, or a tongue, swing hook or shootbolt, means a different page.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. Match 5\/8\" (16 mm).\u003c\/li\u003e\n\u003cli\u003eCheck the length: 41-1\/8\" (1045 mm) to 89-3\/8\" (2270 mm) in the version table. A fitted extension may have been cut shorter at the top, so it can measure less.\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the lower roller on the extension: 51-3\/4\" (1314 mm), 59-5\/8\" (1514 mm), 67-1\/2\" (1714 mm) or 75-3\/8\" (1914 mm). Subtract the 36\" (914 mm) handle height for HOPPE's figure.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour extension has only one roller: HOPPE HLS® 9000 Two Roller – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe locking points on your extension are tongues, not rollers: HOPPE HLS® 9000 Tongue – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe locking points on your extension are swing hooks, not rollers: HOPPE HLS® 9000 Swing Hook – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe locking points on your extension are shootbolts, not rollers: HOPPE HLS® 9000 Shootbolt – Top Extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo, the HOPPE HLS 9000 lock extension with roller is not the whole lock. It is a section of the operating drive rail that attaches to the gear. Combine the extension with the gear for a complete lock. A cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eWhat is the long metal strip above the handle on my door edge called?\u003c\/h4\u003e\u003cp\u003eThe upper part of the faceplate strip above the gear, with the top locking points on it, is a lock extension. HOPPE calls it the Extension. For a HOPPE HLS 9000 lock with rollers, pick the lock extension with roller by length and locking point height.\u003c\/p\u003e\u003ch4\u003eHow do I measure the locking point height?\u003c\/h4\u003e\u003cp\u003eMeasure from the door bottom up to the lower of the two rollers on the extension, then subtract the 36\" (914 mm) handle height. HOPPE lists 15-3\/4\" (400 mm), 23-5\/8\" (600 mm), 31-1\/2\" (800 mm) or 39-3\/8\" (1000 mm).\u003c\/p\u003e\u003ch4\u003eWhich length do I need?\u003c\/h4\u003e\u003cp\u003ePick the HOPPE HLS 9000 lock extension with roller by length, from 41-1\/8\" (1045 mm) to 89-3\/8\" (2270 mm). HOPPE gives the overall length of the extension as printed in its table. Match the value in the version table.\u003c\/p\u003e\u003ch4\u003eCan the extension be cut shorter?\u003c\/h4\u003e\u003cp\u003eHOPPE lists a maximum cut-off of 8-1\/8\" (206 mm) only for HOPPE HLS 9000 lock extension with roller 8778851. The other versions do not state a cut-off. Check the version table.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"41-1\/8\" (1045 mm) – 2 rollers at 15-3\/4\" \u0026 31-1\/2\" above handle","offer_id":50751527518405,"sku":"8778851","price":89.99,"currency_code":"USD","in_stock":true},{"title":"48-1\/16\" (1220 mm) – 2 rollers at 15-3\/4\" \u0026 31-1\/2\" above handle","offer_id":50751527551173,"sku":"8778855","price":99.99,"currency_code":"USD","in_stock":true},{"title":"54-15\/16\" (1395 mm) – 2 rollers at 23-5\/8\" \u0026 45-1\/4\" above handle","offer_id":50751527583941,"sku":"8778859","price":79.99,"currency_code":"USD","in_stock":true},{"title":"61-13\/16\" (1570 mm) – 2 rollers at 23-5\/8\" \u0026 45-1\/4\" above handle","offer_id":50751527616709,"sku":"8778863","price":89.99,"currency_code":"USD","in_stock":true},{"title":"68-11\/16\" (1745 mm) – 2 rollers at 31-1\/2\" \u0026 59-1\/16\" above handle","offer_id":50751527649477,"sku":"8778867","price":109.99,"currency_code":"USD","in_stock":true},{"title":"75-9\/16\" (1920 mm) – 2 rollers at 31-1\/2\" \u0026 59-1\/16\" above handle","offer_id":50751527682245,"sku":"8778871","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_1aecb540-59b4-4241-b65e-0858958265ec.png?v=1794081268"},{"product_id":"hoppe-hls-9000-bottom-extension-with-shootbolt-second-door","title":"HOPPE bottom extension with shootbolt, 17-1\/16\" (434 mm)","description":"\u003cp\u003eThis bottom extension is a section of the operating drive rail on the second door of a pair. It attaches below the 3-piece inactive gear and carries the bottom shootbolt. HOPPE calls it the Inactive Bottom Extension. Both versions are 17-1\/16\" (434 mm) with a 5\/8\" (16 mm) faceplate. Pick by shootbolt throw: 3\/4\" (20 mm) or 1\" (25.4 mm).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShootbolt throw:\u003c\/strong\u003e 3\/4\" (20 mm) on 8787583; 1\" (25.4 mm) on 8779355\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 17-1\/16\" (434 mm) overall, as printed in HOPPE's table, on both versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm) across the face of the metal strip on the door edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut-off:\u003c\/strong\u003e 11\/16\" (17 mm) on both versions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle height:\u003c\/strong\u003e HOPPE: use this bottom extension for a 36\" (914 mm) handle height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor:\u003c\/strong\u003e Second door of a pair (HOPPE: Inactive), HOPPE HLS 9000 swing door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e 3-piece lock: inactive gear + top extension + this bottom extension. Cover plates cover the seams. All sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table: 8787583 or 8779355.\u003c\/li\u003e\n\u003cli\u003eCheck that your old part is the section of the faceplate strip below the gear on the second door, with a shootbolt that shoots down into the sill.\u003c\/li\u003e\n\u003cli\u003eMatch the shootbolt throw: 3\/4\" (20 mm) is 8787583, 1\" (25.4 mm) is 8779355. Use the same throw as your gear and top extension.\u003c\/li\u003e\n\u003cli\u003eMeasure the overall length of the extension and match 17-1\/16\" (434 mm).\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge and match 5\/8\" (16 mm).\u003c\/li\u003e\n\u003cli\u003eCheck the maximum cut-off: match the value in the spec table, 11\/16\" (17 mm).\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. It is one section of HOPPE's 3-piece inactive lock: the inactive gear, a top extension and this bottom extension make the complete lock. A cover plate covers each seam. Each part is sold separately.\u003c\/p\u003e\u003ch4\u003eWhat does this long metal strip with a bolt do?\u003c\/h4\u003e\u003cp\u003eIt is a section of the operating drive rail that attaches below the inactive gear and carries the bottom shootbolt, which shoots down into the sill of the frame.\u003c\/p\u003e\u003ch4\u003eHow do I measure the extension?\u003c\/h4\u003e\u003cp\u003eMeasure the overall length of the HOPPE HLS 9000 lock extension with shootbolt. Both versions are 17-1\/16\" (434 mm). Measure the faceplate width across the face of the metal strip on the door edge. Both versions are 5\/8\" (16 mm).\u003c\/p\u003e\u003ch4\u003eWhich version do I need?\u003c\/h4\u003e\u003cp\u003eMatch the part number on your old part or its paperwork. Otherwise match the shootbolt throw: 8787583 has a 3\/4\" (20 mm) throw, 8779355 a 1\" (25.4 mm) throw. Length, faceplate width and maximum cut-off are the same.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751531385029,"sku":"8787583","price":79.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751531417797,"sku":"8779355","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_7d5e859c-83ac-48b9-a6a9-b2deeed0877b.png?v=1794081288"},{"product_id":"hoppe-hls-9000-top-extension-with-shootbolt-second-door","title":"HOPPE top extension with shootbolt, inactive second door","description":"\u003cp\u003eA top extension with shootbolt is the section of the operating drive rail above the inactive gear on the second door of a pair. It carries the top shootbolt. HOPPE calls this the Inactive Top Extension. Pick by length, faceplate width, 5\/8\" (16 mm) or 3\/4\" (20 mm), and shootbolt throw, 3\/4\" (20 mm) or 1\" (25.4 mm).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e By version, from 16-5\/16\" (415 mm) to 76-3\/8\" (1940 mm). Match the value in the version table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm) or 3\/4\" (20 mm), by version. Measure across the face of the metal strip on the door edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut-off:\u003c\/strong\u003e 3-15\/16\" (100 mm) or 9-1\/16\" (230 mm), by version. Not listed for some versions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000 on a swing (hinged) door, carrying the top shootbolt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShootbolt throw:\u003c\/strong\u003e 3\/4\" (20 mm) or 1\" (25.4 mm), by version. Match your gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor:\u003c\/strong\u003e Second door of a pair (HOPPE: Inactive), HOPPE HLS 9000 swing door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Combine with the inactive gear for a complete lock (3-piece locks add a bottom extension). A cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck that your part is the section of the faceplate strip above the gear on an HLS 9000 inactive door, carrying the top shootbolt.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. Pick 5\/8\" (16 mm) or 3\/4\" (20 mm).\u003c\/li\u003e\n\u003cli\u003eMatch the shootbolt throw to your gear. 1\" (25.4 mm): 3416896, 8786975, 8786979, 8786983, 8786987, 8786991, 8786995, 8786999, 8787003, 8787007, 8787011, 8787015, 8787019, 2399861, 2399879, 2399924, 2399932. All others: 3\/4\" (20 mm).\u003c\/li\u003e\n\u003cli\u003eCheck the length: match the value in the version table, from 16-5\/16\" (415 mm) to 76-3\/8\" (1940 mm).\u003c\/li\u003e\n\u003cli\u003eCheck the maximum cut-off: match the value in the version table, 3-15\/16\" (100 mm) or 9-1\/16\" (230 mm).\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. It is one section of the lock. Combine it with the inactive gear for a complete lock; HOPPE's 3-piece lock also uses a bottom extension, and top extensions can be used as bottom extensions. A cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eWhat is the metal strip with the bolt on my door edge called?\u003c\/h4\u003e\u003cp\u003eOn a HOPPE HLS 9000 inactive door, the section of the faceplate strip above the gear that carries the top shootbolt is the top extension (HOPPE: Inactive Top Extension). It is a section of the operating drive rail.\u003c\/p\u003e\u003ch4\u003eHow do I measure the faceplate width?\u003c\/h4\u003e\u003cp\u003eMeasure the faceplate width of the HOPPE HLS 9000 lock extension across the face of the metal strip on the door edge. The extension comes in 5\/8\" (16 mm) or 3\/4\" (20 mm), by version.\u003c\/p\u003e\u003ch4\u003eWhich length do I need?\u003c\/h4\u003e\u003cp\u003eMatch the part number first. Otherwise match length, 16-5\/16\" (415 mm) to 76-3\/8\" (1940 mm), faceplate width and shootbolt throw. Some lengths come in both 3\/4\" (20 mm) and 1\" (25.4 mm) throw, so check the throw.\u003c\/p\u003e\u003ch4\u003eWhich versions have a 1\" (25.4 mm) shootbolt throw?\u003c\/h4\u003e\u003cp\u003e3416896, 8786975 to 8787019, 2399861, 2399879, 2399924 and 2399932. All other versions have a 3\/4\" (20 mm) throw.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"16-5\/16\" (415 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534104773,"sku":"3416909","price":89.99,"currency_code":"USD","in_stock":true},{"title":"19-5\/16\" (490 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534137541,"sku":"8778759","price":89.99,"currency_code":"USD","in_stock":true},{"title":"22-1\/4\" (565 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534170309,"sku":"8778763","price":89.99,"currency_code":"USD","in_stock":true},{"title":"25-3\/16\" (640 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534203077,"sku":"8778767","price":89.99,"currency_code":"USD","in_stock":true},{"title":"28-1\/8\" (715 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534235845,"sku":"8778771","price":89.99,"currency_code":"USD","in_stock":true},{"title":"31-1\/8\" (790 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534268613,"sku":"8778775","price":79.99,"currency_code":"USD","in_stock":true},{"title":"34-1\/16\" (865 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534301381,"sku":"8778779","price":79.99,"currency_code":"USD","in_stock":true},{"title":"37\" (940 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534334149,"sku":"8778783","price":109.99,"currency_code":"USD","in_stock":true},{"title":"44-7\/8\" (1140 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534366917,"sku":"8778787","price":149.99,"currency_code":"USD","in_stock":true},{"title":"52-3\/4\" (1340 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534399685,"sku":"8778791","price":129.99,"currency_code":"USD","in_stock":true},{"title":"60-5\/8\" (1540 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534432453,"sku":"8778795","price":129.99,"currency_code":"USD","in_stock":true},{"title":"68-1\/2\" (1740 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534465221,"sku":"8778799","price":159.99,"currency_code":"USD","in_stock":true},{"title":"76-3\/8\" (1940 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 3\/4\" (20 mm) shootbolt throw","offer_id":50751534497989,"sku":"8778803","price":139.99,"currency_code":"USD","in_stock":true},{"title":"16-5\/16\" (415 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534530757,"sku":"3416896","price":89.99,"currency_code":"USD","in_stock":true},{"title":"19-5\/16\" (490 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534563525,"sku":"8786975","price":79.99,"currency_code":"USD","in_stock":true},{"title":"22-1\/4\" (565 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534596293,"sku":"8786979","price":89.99,"currency_code":"USD","in_stock":true},{"title":"25-3\/16\" (640 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534629061,"sku":"8786983","price":99.99,"currency_code":"USD","in_stock":true},{"title":"28-1\/8\" (715 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534661829,"sku":"8786987","price":99.99,"currency_code":"USD","in_stock":true},{"title":"31-1\/8\" (790 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534694597,"sku":"8786991","price":99.99,"currency_code":"USD","in_stock":true},{"title":"34-1\/16\" (865 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534727365,"sku":"8786995","price":99.99,"currency_code":"USD","in_stock":true},{"title":"37\" (940 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534760133,"sku":"8786999","price":119.99,"currency_code":"USD","in_stock":true},{"title":"44-7\/8\" (1140 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534792901,"sku":"8787003","price":139.99,"currency_code":"USD","in_stock":true},{"title":"52-3\/4\" (1340 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534825669,"sku":"8787007","price":159.99,"currency_code":"USD","in_stock":true},{"title":"60-5\/8\" (1540 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534858437,"sku":"8787011","price":169.99,"currency_code":"USD","in_stock":true},{"title":"68-1\/2\" (1740 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534891205,"sku":"8787015","price":189.99,"currency_code":"USD","in_stock":true},{"title":"76-3\/8\" (1940 mm) – 1 shootbolt \/ 5\/8\" (16 mm) faceplate, 1\" (25.4 mm) shootbolt throw","offer_id":50751534923973,"sku":"8787019","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_60fceed3-068e-4514-82a0-6a225d9e14f1.png?v=1794081307"},{"product_id":"hoppe-hls-9000-middle-extension-with-roller-16mm-faceplate","title":"HOPPE middle extension with roller, 5\/8\" (16 mm) faceplate","description":"\u003cp\u003eA middle extension with roller is a section of the operating drive rail that attaches to the gear to reach the height of the door and carries the upper locking points. HOPPE calls this the extension. Pick by length and locking point height. The faceplate is 5\/8\" (16 mm). HOPPE combines the top extension with the gear for a complete lock. Shootbolt locks add a middle extension.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e By version, from 27-3\/16\" (691 mm) to 62-5\/8\" (1591 mm). Match your part number in the version table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e 49\" (1244 mm) to 95-1\/16\" (2414 mm) from the door bottom, by version (HOPPE: 13\" (330 mm) to 59-1\/16\" (1500 mm) above the handle center)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e One roller on every version. The shootbolt is on the top extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm), measured across the face of the metal strip on the door edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000, the same on every version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual on every version of this HOPPE HLS 9000 middle extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Goes between the gear and the shootbolt top extension (sold separately). A cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck that your old part is a middle extension and that its locking point is a roller. An extension with a tongue, swing hook, round bolt or shootbolt locking point is a different part.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. Every version on this page is 5\/8\" (16 mm).\u003c\/li\u003e\n\u003cli\u003eCheck the length of your old extension. Match the value in the version table: 27-3\/16\" (691 mm), 29-3\/16\" (742 mm), 36-1\/4\" (920 mm), 44-15\/16\" (1141 mm) or 62-5\/8\" (1591 mm).\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the roller, then subtract the 36\" (914 mm) handle height. The two 27-3\/16\" (691 mm) versions differ: 8778823 is 23-5\/8\" (600 mm), 8779295 is 13\" (330 mm).\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour old part is the top section of the drive rail, not a middle section: HOPPE HLS® 9000 Two Roller – Top Extension, Four Roller – Top Extension or Automatic Two Roller – Top Extension\u003c\/li\u003e\n\u003cli\u003eYour old extension has a tongue instead of a roller: HOPPE HLS® 9000 Tongue + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eYour old extension has a swing hook instead of a roller: HOPPE HLS® 9000 Swing Hook + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eYour old extension has a round bolt instead of a roller: HOPPE HLS® 9000 Roundbolt + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eYour old middle extension has no locking point on it: HOPPE HLS® 9000 Shootbolt – Middle Extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo, the HOPPE HLS 9000 middle extension with roller is one section of the operating drive rail, not the whole lock. It goes between the gear and the shootbolt top extension, sold separately.\u003c\/p\u003e\u003ch4\u003eWhich length do I need?\u003c\/h4\u003e\u003cp\u003eThe HOPPE HLS 9000 middle extension with roller comes in lengths from 27-3\/16\" (691 mm) to 62-5\/8\" (1591 mm), by version. Match the part number, or the length and locking point height, to the version table.\u003c\/p\u003e\u003ch4\u003eTwo versions are 27-3\/16\" long. How do I tell them apart?\u003c\/h4\u003e\u003cp\u003eThe two 27-3\/16\" (691 mm) HOPPE HLS 9000 middle extensions with roller differ by locking point height. Part 8778823 lists 23-5\/8\" (600 mm). Part 8779295 lists 13\" (330 mm).\u003c\/p\u003e\u003ch4\u003eHow wide is the metal strip on the door edge?\u003c\/h4\u003e\u003cp\u003eEvery HOPPE HLS 9000 middle extension with roller on this page has a 5\/8\" (16 mm) faceplate. Measure across the face of the metal strip on the door edge.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"27-3\/16\" (691 mm) – 1 roller at 23-5\/8\" above handle","offer_id":50751563661509,"sku":"8778823","price":69.99,"currency_code":"USD","in_stock":true},{"title":"44-15\/16\" (1141 mm) – 1 roller at 41-5\/16\" above handle","offer_id":50751563694277,"sku":"8778827","price":89.99,"currency_code":"USD","in_stock":true},{"title":"27-3\/16\" (691 mm) – 1 roller at 13\" above handle","offer_id":50751563727045,"sku":"8779295","price":40.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_9495491a-d813-4004-a6b1-8ba6c934f0bc.png?v=1794081374"},{"product_id":"hoppe-hls-9000-middle-extension-with-round-bolt-16mm-faceplate","title":"HOPPE middle extension with round bolt, 5\/8\" (16 mm) faceplate","description":"\u003cp\u003eThis middle extension with round bolt is a section of the operating drive rail that attaches to the gear to reach the height of the door. HOPPE calls this the Extension. Pick by length, 18-3\/8\" (466 mm) to 62-5\/8\" (1591 mm). The faceplate is 5\/8\" (16 mm) wide. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18-3\/8\" (466 mm), 27-3\/16\" (691 mm), 44-15\/16\" (1141 mm) or 62-5\/8\" (1591 mm), by version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e 50-3\/4\" (1289 mm) to 95-1\/16\" (2414 mm) from the door bottom, by version (HOPPE: 14-3\/4\" (375 mm) to 59-1\/16\" (1500 mm) above the handle center)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e Roundbolt on every version of this HOPPE middle extension. The shootbolt is on the top extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm) across the face of the metal strip on the door edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e Fits the HOPPE HLS 9000 lock system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual on every version of this HOPPE HLS 9000 middle extension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Goes between the gear and the shootbolt top extension (sold separately). A cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table: 3537057, 8778739, 8778743 or 8778747.\u003c\/li\u003e\n\u003cli\u003eCheck the locking point on your old extension. It must be a round bolt, on a middle extension, not on the top extension.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. It must match 5\/8\" (16 mm).\u003c\/li\u003e\n\u003cli\u003eCheck the length of your old extension. Match the value in the version table: 18-3\/8\" (466 mm), 27-3\/16\" (691 mm), 44-15\/16\" (1141 mm) or 62-5\/8\" (1591 mm).\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the round bolt, then subtract the 36\" (914 mm) handle height. Match 14-3\/4\" (375 mm), 23-5\/8\" (600 mm), 41-5\/16\" (1050 mm) or 59-1\/16\" (1500 mm).\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe locking point on your middle extension is a roller, not a round bolt: HOPPE HLS® 9000 Roller + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eThe locking point on your middle extension is a swing hook, not a round bolt: HOPPE HLS® 9000 Swing Hook + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eThe locking point on your middle extension is a tongue, not a round bolt: HOPPE HLS® 9000 Tongue + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eYour middle extension has no locking point on it: HOPPE HLS® 9000 Shootbolt – Middle Extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this middle extension the whole lock?\u003c\/h4\u003e\u003cp\u003eNo, the HOPPE HLS 9000 middle extension with round bolt is one section of the operating drive rail. It goes between the gear and the shootbolt top extension, sold separately. A cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eHow do I measure the faceplate width on a HOPPE HLS 9000 extension?\u003c\/h4\u003e\u003cp\u003eMeasure the faceplate width of the HOPPE HLS 9000 middle extension with round bolt across the face of the metal strip on the door edge. Every version of this middle extension has a 5\/8\" (16 mm) faceplate.\u003c\/p\u003e\u003ch4\u003eWhich length of HOPPE HLS 9000 middle extension with round bolt do I need?\u003c\/h4\u003e\u003cp\u003ePick the HOPPE HLS 9000 middle extension with round bolt by matching your old extension to the version table: 18-3\/8\" (466 mm), 27-3\/16\" (691 mm), 44-15\/16\" (1141 mm) or 62-5\/8\" (1591 mm). Each length has its own locking point height.\u003c\/p\u003e\u003ch4\u003eWhat does HOPPE call a middle extension with round bolt?\u003c\/h4\u003e\u003cp\u003eHOPPE calls the middle extension with round bolt an Extension. HOPPE extensions are sections of the operating drive rail that attach to the gear to reach the height of the door.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"27-3\/16\" (691 mm) – 1 roundbolt at 23-5\/8\" above handle","offer_id":50751576375493,"sku":"8778739","price":139.99,"currency_code":"USD","in_stock":true},{"title":"44-15\/16\" (1141 mm) – 1 roundbolt at 41-5\/16\" above handle","offer_id":50751576408261,"sku":"8778743","price":149.99,"currency_code":"USD","in_stock":true},{"title":"62-5\/8\" (1591 mm) – 1 roundbolt at 59-1\/16\" above handle","offer_id":50751576441029,"sku":"8778747","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_8964b1b8-a593-4c60-8279-4dbe8dd00012.png?v=1794081412"},{"product_id":"hoppe-hls-9000-top-extension-with-round-bolt-16mm-faceplate","title":"HOPPE top extension with round bolt, 5\/8\" (16 mm) faceplate","description":"\u003cp\u003eA top extension with round bolt is a section of the operating drive rail. It attaches to the gear to reach the height of the door and carries the upper locking points. HOPPE calls this the Extension. Pick by length, from 14-15\/16\" (379 mm) to 89-3\/8\" (2270 mm), for the HLS 9000 lock system. Combine the top extension with the gear for a complete lock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 11 versions by part number, from 14-15\/16\" (379 mm) to 89-3\/8\" (2270 mm) overall, before any cut at fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm) on every version (HOPPE catalog code 16S). The version table lists it for 3444221 and 8778663.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor type:\u003c\/strong\u003e Swing (hinged) door\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Combine with the gear for a complete lock. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck that your old part is the upper part of the faceplate strip above the gear, with the top locking points on it. Check that those locking points are round bolts.\u003c\/li\u003e\n\u003cli\u003eMeasure the overall length end to end and compare with the version table, 14-15\/16\" (379 mm) to 89-3\/8\" (2270 mm). A fitted extension may have been cut shorter at the top, so match the part number where you can.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. Every version is 5\/8\" (16 mm).\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. The HOPPE HLS 9000 top extension with round bolt is one section of the drive rail. Combine it with the gear for a complete lock. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eHow do I measure a HOPPE HLS 9000 top extension?\u003c\/h4\u003e\u003cp\u003eMeasure the overall length of the HOPPE HLS 9000 top extension with round bolt and compare it with the version table, 14-15\/16\" (379 mm) to 89-3\/8\" (2270 mm). A fitted extension may have been cut shorter at the top.\u003c\/p\u003e\u003ch4\u003eWhat is the long metal strip above the handle on the door edge called?\u003c\/h4\u003e\u003cp\u003eOn a HOPPE HLS 9000 lock, the upper part of the faceplate strip above the gear, with the top locking points on it, is the extension. HOPPE calls it the Extension. The version with round bolts is the top extension with round bolt.\u003c\/p\u003e\u003ch4\u003eWhat faceplate width does the HOPPE HLS 9000 top extension with round bolt have?\u003c\/h4\u003e\u003cp\u003eEvery HOPPE HLS 9000 top extension with round bolt has a 5\/8\" (16 mm) faceplate (HOPPE catalog code 16S). Measure across the face of the metal strip on the door edge to check.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"45-3\/4\" (1162 mm)","offer_id":50751583649989,"sku":"3444221","price":139.99,"currency_code":"USD","in_stock":true},{"title":"41-1\/8\" (1045 mm)","offer_id":50751583682757,"sku":"8778659","price":149.99,"currency_code":"USD","in_stock":true},{"title":"48-1\/16\" (1220 mm)","offer_id":50751583715525,"sku":"8778663","price":189.99,"currency_code":"USD","in_stock":true},{"title":"54-15\/16\" (1395 mm)","offer_id":50751583748293,"sku":"8778667","price":199.99,"currency_code":"USD","in_stock":true},{"title":"61-13\/16\" (1570 mm)","offer_id":50751583781061,"sku":"8778671","price":149.99,"currency_code":"USD","in_stock":true},{"title":"68-11\/16\" (1745 mm)","offer_id":50751583813829,"sku":"8778675","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_ddc9e6d3-c4d6-4279-b652-41e17634b4f1.png?v=1794081437"},{"product_id":"hoppe-hls-9000-middle-extension-connecting-rod","title":"HOPPE middle extension, connecting rod with no locking point","description":"\u003cp\u003eThis middle extension is a plain section of the operating drive rail with no locking point of its own. HOPPE calls it the Extension. In a shootbolt lock it goes between the gear and the shootbolt top extension. Pick by faceplate width, 5\/8\" (16 mm) or 3\/4\" (20 mm), and by length. A cover plate covers the seam.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm) or 3\/4\" (20 mm), by version. Measured across the face of the metal strip on the door edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7-1\/2\" (191 mm) to 80-3\/8\" (2041 mm), by version. Match the value in the version table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e None on this section. The shootbolt is on the top extension, sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Middle of the drive rail, not the top section\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual, not automatic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Goes between the gear and the shootbolt top extension. A cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck that your old part is a middle extension on a manual HOPPE HLS 9000 lock with no locking point on it: no tongue, roller, swing hook or round bolt. The shootbolt sits on the top extension above it.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. Pick 5\/8\" (16 mm) or 3\/4\" (20 mm).\u003c\/li\u003e\n\u003cli\u003eCheck the overall length of your old extension and match the value in the version table. With the 5\/8\" (16 mm) faceplate, lengths run 7-1\/2\" (191 mm) to 80-3\/8\" (2041 mm). With the 3\/4\" (20 mm) faceplate, lengths run 17-3\/8\" (441 mm) to 62-5\/8\" (1591 mm).\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour lock is automatic, not manual: HOPPE HLS® 9000 Automatic Tongue – Top Extension, or HOPPE HLS® 9000 Automatic Two Roller – Top Extension\u003c\/li\u003e\n\u003cli\u003eYour middle extension has a tongue, roller, swing hook or round bolt on it: HOPPE HLS® 9000 Tongue + Shootbolt – Middle Extension, HOPPE HLS® 9000 Roller + Shootbolt – Middle Extension, HOPPE HLS® 9000 Swing Hook + Shootbolt – Middle Extension, or HOPPE HLS® 9000 Roundbolt + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eYou need the top section that carries the shootbolt: HOPPE HLS® 9000 Shootbolt – Top Extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. This HOPPE HLS 9000 middle extension is one section of the operating drive rail. A shootbolt lock is the gear, this middle extension and the shootbolt top extension. A cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eHow do I measure the faceplate width?\u003c\/h4\u003e\u003cp\u003eMeasure the faceplate width of the HOPPE HLS 9000 middle extension for shootbolt locks across the face of the metal strip on the door edge. Then pick 5\/8\" (16 mm) or 3\/4\" (20 mm) to match.\u003c\/p\u003e\u003ch4\u003eWhich length do I need?\u003c\/h4\u003e\u003cp\u003ePick the length of the HOPPE HLS 9000 middle extension for shootbolt locks that matches the version table value for your part number or old extension. 5\/8\" (16 mm): 7-1\/2\" (191 mm) to 80-3\/8\" (2041 mm). 3\/4\" (20 mm): 17-3\/8\" (441 mm) to 62-5\/8\" (1591 mm).\u003c\/p\u003e\u003ch4\u003eIs a middle extension the same as a top extension?\u003c\/h4\u003e\u003cp\u003eNo. The HOPPE HLS 9000 middle extension and the top extension are separate parts. On a shootbolt lock the shootbolt is on the top extension; this middle extension has no locking point.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"5\/8\" (16 mm) \/ 17-3\/8\" (441 mm)","offer_id":50751593283781,"sku":"2424114","price":59.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 80-3\/8\" (2041 mm)","offer_id":50751593316549,"sku":"3174559","price":79.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 27-3\/16\" (691 mm)","offer_id":50751593349317,"sku":"8778691","price":69.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 44-15\/16\" (1141 mm)","offer_id":50751593382085,"sku":"8778695","price":79.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 62-5\/8\" (1591 mm)","offer_id":50751593414853,"sku":"8778699","price":79.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 7-1\/2\" (191 mm)","offer_id":50751593447621,"sku":"8779199","price":29.92,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 62-5\/8\" (1591 mm)","offer_id":50751593480389,"sku":"2185934","price":99.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 44-15\/16\" (1141 mm)","offer_id":50751593513157,"sku":"2185951","price":89.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 27-3\/16\" (691 mm)","offer_id":50751593545925,"sku":"2186523","price":79.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 17-3\/8\" (441 mm)","offer_id":50751593578693,"sku":"2424131","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_a825b545-f2a4-4e07-a293-92ecdef81e33.png?v=1794081456"},{"product_id":"hoppe-hls-9000-top-extension-with-shootbolt-20mm-throw","title":"HOPPE top extension with shootbolt, 3\/4\" (20 mm) throw","description":"\u003cp\u003eA top extension with shootbolt is a section of the operating drive rail that attaches to the gear to reach the height of the door and carries the upper locking points. HOPPE calls this the Extension. Pick by faceplate width, 5\/8\" (16 mm) or 3\/4\" (20 mm), and by length, 15-3\/4\" (400 mm) to 36-7\/16\" (925 mm). Combine it with the gear for a complete lock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm) or 3\/4\" (20 mm), by version. Measure across the face of the metal strip on the door edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 15-3\/4\" (400 mm) to 36-7\/16\" (925 mm), by version. Match the value in the version table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e Fits HOPPE HLS 9000. The same on every version of this top extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e Shootbolt, the top locking point carried on this extension, on every version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual on every version of this HOPPE HLS 9000 top extension with shootbolt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut-off:\u003c\/strong\u003e 3-15\/16\" (100 mm) on every version of this HOPPE HLS 9000 top extension with shootbolt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Combine with the gear for a complete lock. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck your old part. The top extension is the upper part of the faceplate strip above the gear, with the top locking points on it. On this page, that top locking point is a shootbolt.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. Match 5\/8\" (16 mm) or 3\/4\" (20 mm).\u003c\/li\u003e\n\u003cli\u003eCheck the length: 15-3\/4\" (400 mm) to 36-7\/16\" (925 mm) in the version table. Up to 3-15\/16\" (100 mm) may have been cut off the top at fitting, so a fitted one can measure less.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour old top extension has a tongue instead of a shootbolt: HOPPE HLS 9000 Tongue – Top Extension or HOPPE HLS 9000 Automatic Tongue – Top Extension.\u003c\/li\u003e\n\u003cli\u003eYour old top extension has rollers instead of a shootbolt: HOPPE HLS 9000 Two Roller – Top Extension, HOPPE HLS 9000 Four Roller – Top Extension or HOPPE HLS 9000 Automatic Two Roller – Top Extension.\u003c\/li\u003e\n\u003cli\u003eYour old top extension has a swing hook instead of a shootbolt: HOPPE HLS 9000 Swing Hook – Top Extension.\u003c\/li\u003e\n\u003cli\u003eYour old part is a middle section of the strip, not the top section: HOPPE HLS 9000 Shootbolt – Middle Extension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. The HOPPE HLS 9000 top extension with shootbolt is one section of the drive rail. Combine it with the gear for a complete lock. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eWhat is the metal strip with a bolt above my door handle called?\u003c\/h4\u003e\u003cp\u003eOn a HOPPE HLS 9000 lock, the upper part of the faceplate strip above the gear, with the top locking points on it, is the top extension. HOPPE calls it the Extension. This page covers the top extension with shootbolt.\u003c\/p\u003e\u003ch4\u003eHow do I measure the faceplate width of a top extension?\u003c\/h4\u003e\u003cp\u003eMeasure the HOPPE HLS 9000 top extension with shootbolt across the face of the metal strip on the door edge. Versions come in 5\/8\" (16 mm) or 3\/4\" (20 mm).\u003c\/p\u003e\u003ch4\u003eWhich length of top extension do I need?\u003c\/h4\u003e\u003cp\u003eThe HOPPE HLS 9000 top extension with shootbolt comes in lengths from 15-3\/4\" (400 mm) to 36-7\/16\" (925 mm), by version. Match the part number on your old part or the value in the version table.\u003c\/p\u003e\u003ch4\u003eIs the HOPPE HLS 9000 top extension with shootbolt stainless steel?\u003c\/h4\u003e\u003cp\u003eOnly one version of the HOPPE HLS 9000 top extension with shootbolt, part number 8778611, lists stainless steel. Material is not stated for the other versions.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"5\/8\" (16 mm) \/ 36-7\/16\" (925 mm) – 1 shootbolt","offer_id":50751598624965,"sku":"3389517","price":89.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 15-3\/4\" (400 mm) – 1 shootbolt","offer_id":50751598657733,"sku":"8778611","price":89.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 18-11\/16\" (475 mm) – 1 shootbolt","offer_id":50751598690501,"sku":"8778615","price":89.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 21-5\/8\" (550 mm) – 1 shootbolt","offer_id":50751598723269,"sku":"8778619","price":89.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 24-5\/8\" (625 mm) – 1 shootbolt","offer_id":50751598756037,"sku":"8778623","price":99.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 27-9\/16\" (700 mm) – 1 shootbolt","offer_id":50751598788805,"sku":"8778627","price":109.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 30-1\/2\" (775 mm) – 1 shootbolt","offer_id":50751598821573,"sku":"8778631","price":109.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 30-1\/2\" (775 mm) – 1 shootbolt","offer_id":50751598854341,"sku":"2185993","price":99.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 27-9\/16\" (700 mm) – 1 shootbolt","offer_id":50751598887109,"sku":"2186013","price":99.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 24-5\/8\" (625 mm) – 1 shootbolt","offer_id":50751598919877,"sku":"2186030","price":79.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 21-5\/8\" (550 mm) – 1 shootbolt","offer_id":50751598952645,"sku":"2186486","price":79.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 18-11\/16\" (475 mm) – 1 shootbolt","offer_id":50751598985413,"sku":"2186507","price":79.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 15-3\/4\" (400 mm) – 1 shootbolt","offer_id":50751599018181,"sku":"2186566","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_63b6715b-8c81-47fc-ad42-97290463b760.png?v=1794081476"},{"product_id":"hoppe-hls-9000-middle-extension-with-swing-hook-16mm-faceplate","title":"HOPPE middle extension with swing hook, 5\/8\" (16 mm) faceplate","description":"\u003cp\u003eThis middle extension with swing hook is a section of the operating drive rail. It attaches to the gear to reach the height of the door and carries the upper locking points. HOPPE calls this the Extension. Pick by length, 24-1\/8\" (612 mm) to 63-7\/16\" (1612 mm), and by locking point height. Faceplate width is 5\/8\" (16 mm). A cover plate covers the seam.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e By version: 24-1\/8\" (612 mm), 39-13\/16\" (1012 mm), 51-3\/8\" (1305 mm) or 63-7\/16\" (1612 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e Door bottom to lowest hook: 55-11\/16\" (1414 mm), 59-5\/8\" (1514 mm) or 71-7\/16\" (1814 mm), by version. HOPPE measures from the handle center.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e One or two swing hooks, by version. The shootbolt is on the top extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm), measured across the face of the metal strip on the door edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000 multipoint lock for swing (hinged) doors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual on every version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Goes between the gear and the shootbolt top extension (sold separately). A cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table: 3622868, 3644160, 3644178, 3644186 or 3644194.\u003c\/li\u003e\n\u003cli\u003eCheck that your old part is a middle section of the drive rail with a swing hook. A top section with a swing hook is a different page: HOPPE HLS® 9000 Swing Hook – Top Extension.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. Every version on this page is 5\/8\" (16 mm).\u003c\/li\u003e\n\u003cli\u003eMeasure the overall length of the extension and match the value in the version table: 24-1\/8\" (612 mm), 39-13\/16\" (1012 mm), 51-3\/8\" (1305 mm) or 63-7\/16\" (1612 mm).\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the lowest swing hook, then subtract the 36\" (914 mm) handle height. Match 19-11\/16\" (500 mm), 23-5\/8\" (600 mm) or 35-7\/16\" (900 mm) in the table.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour old middle extension has rollers instead of a swing hook: HOPPE HLS® 9000 Roller + Shootbolt – Middle Extension.\u003c\/li\u003e\n\u003cli\u003eYour old middle extension has a tongue instead of a swing hook: HOPPE HLS® 9000 Tongue + Shootbolt – Middle Extension.\u003c\/li\u003e\n\u003cli\u003eYour old middle extension has a round bolt instead of a swing hook: HOPPE HLS® 9000 Roundbolt + Shootbolt – Middle Extension.\u003c\/li\u003e\n\u003cli\u003eYour old middle extension has no locking point on it: HOPPE HLS® 9000 Shootbolt – Middle Extension.\u003c\/li\u003e\n\u003cli\u003eYour old part with a swing hook is the top section of the drive rail, not a middle section: HOPPE HLS® 9000 Swing Hook – Top Extension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. The HOPPE HLS 9000 middle extension with swing hook is one section of the operating drive rail. It goes between the gear and the shootbolt top extension, sold separately. A cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eHow do I measure the faceplate width of a lock extension?\u003c\/h4\u003e\u003cp\u003eMeasure the faceplate width of the HOPPE HLS 9000 middle extension with swing hook across the face of the metal strip on the door edge. Every version of this middle extension is 5\/8\" (16 mm).\u003c\/p\u003e\u003ch4\u003eWhich length of HOPPE HLS 9000 middle extension with swing hook do I need?\u003c\/h4\u003e\u003cp\u003ePick the HOPPE HLS 9000 middle extension with swing hook by the part number on your old part. You can also match its overall length to the version table: 24-1\/8\" (612 mm), 39-13\/16\" (1012 mm), 51-3\/8\" (1305 mm) or 63-7\/16\" (1612 mm).\u003c\/p\u003e\u003ch4\u003eWhy are there two 39-13\/16\" versions?\u003c\/h4\u003e\u003cp\u003eThe HOPPE HLS 9000 middle extension with swing hook in 39-13\/16\" (1012 mm) length comes in two locking point heights. Part 3644178 has 19-11\/16\" (500 mm). Part 3644160 has 35-7\/16\" (900 mm). Match the value in the version table.\u003c\/p\u003e\u003ch4\u003eWhat is a drive rail extension?\u003c\/h4\u003e\u003cp\u003eA drive rail extension, which HOPPE calls an Extension, is a section of the operating drive rail. It attaches to the gear to reach the height of the door and carries the upper locking points. On this page, every HLS 9000 middle extension has a swing hook.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"24-1\/8\" (612 mm) – 1 swing hook at 19-11\/16\" above handle","offer_id":50751617990853,"sku":"3622868","price":89.99,"currency_code":"USD","in_stock":true},{"title":"39-13\/16\" (1012 mm) – 1 swing hook at 35-7\/16\" above handle","offer_id":50751618023621,"sku":"3644160","price":119.99,"currency_code":"USD","in_stock":true},{"title":"39-13\/16\" (1012 mm) – 2 swing hooks at 19-11\/16\" \u0026 35-7\/16\" above handle","offer_id":50751618056389,"sku":"3644178","price":139.99,"currency_code":"USD","in_stock":true},{"title":"51-3\/8\" (1305 mm) – 2 swing hooks at 23-5\/8\" \u0026 46-15\/16\" above handle","offer_id":50751618089157,"sku":"3644186","price":189.99,"currency_code":"USD","in_stock":true},{"title":"63-7\/16\" (1612 mm) – 2 swing hooks at 23-5\/8\" \u0026 59-1\/16\" above handle","offer_id":50751618121925,"sku":"3644194","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_72e0573b-5377-49d9-9e7f-56487cc50361.png?v=1794081514"},{"product_id":"hoppe-hls-9000-top-extension-with-swing-hook-16mm-faceplate","title":"HOPPE top extension with swing hook, 5\/8\" (16 mm) faceplate","description":"\u003cp\u003eThis top extension with swing hook is a section of the operating drive rail that attaches to the gear to reach the height of the door and carries the upper locking points. HOPPE calls this the extension. Pick the version by length and locking point height, measured from the handle center. The faceplate is 5\/8\" (16 mm) wide. Combine it with the gear for a complete lock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 41-5\/8\" (1058 mm), 54-5\/8\" (1388 mm), 68-11\/16\" (1745 mm) or 89-3\/8\" (2270 mm), by version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e Door bottom to lowest hook: 55-11\/16\" (1414 mm), 59-5\/8\" (1514 mm) or 71-7\/16\" (1814 mm), by version. HOPPE measures from the handle center.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut-off:\u003c\/strong\u003e 11\/16\" (18 mm) to 24-13\/16\" (630 mm), by version; match the value in the version table\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e One or two swing hooks, by version. The version table gives the lowest one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm), across the face of the metal strip on the door edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Combine with the gear for a complete lock. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck your old part: a top extension is the upper part of the faceplate strip above the gear, with the top locking points on it. This page has a swing hook as the locking point.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. Match 5\/8\" (16 mm).\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the lowest swing hook: 55-11\/16\" (1414 mm), 59-5\/8\" (1514 mm) or 71-7\/16\" (1814 mm). Subtract the 36\" (914 mm) handle height for HOPPE's figure.\u003c\/li\u003e\n\u003cli\u003eMatch the length to the version table: 41-5\/8\" (1058 mm), 54-5\/8\" (1388 mm), 68-11\/16\" (1745 mm) or 89-3\/8\" (2270 mm). A fitted extension may have been cut shorter at the top.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour old part has a tongue instead of a swing hook, and the lock is automatic: HOPPE HLS® 9000 Automatic Tongue – Top Extension\u003c\/li\u003e\n\u003cli\u003eYour old part has rollers instead of a swing hook, and the lock is automatic: HOPPE HLS® 9000 Automatic Two Roller – Top Extension\u003c\/li\u003e\n\u003cli\u003eYour old part has a shootbolt instead of a swing hook: HOPPE HLS® 9000 Shootbolt – Top Extension\u003c\/li\u003e\n\u003cli\u003eYour old part has a tongue instead of a swing hook: HOPPE HLS® 9000 Tongue – Top Extension\u003c\/li\u003e\n\u003cli\u003eYour old part is a middle extension, not the top section: HOPPE HLS® 9000 Swing Hook + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. The HOPPE HLS 9000 top extension with swing hook is one section of the drive rail. Combine it with the gear for a complete lock. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eWhat is the part above the handle lock called?\u003c\/h4\u003e\u003cp\u003eThe HOPPE HLS 9000 top extension with swing hook is the upper part of the faceplate strip above the gear, with the top locking points on it. HOPPE calls it an extension. Other names are drive rail extension and top lock section.\u003c\/p\u003e\u003ch4\u003eHow do I measure the locking point height?\u003c\/h4\u003e\u003cp\u003eMeasure from the door bottom up to the lowest swing hook, then subtract the 36\" (914 mm) handle height. HOPPE lists 19-11\/16\" (500 mm), 23-5\/8\" (600 mm) or 35-7\/16\" (900 mm) above the handle center.\u003c\/p\u003e\u003ch4\u003eHow do I know which length I need?\u003c\/h4\u003e\u003cp\u003eMatch the overall length of your old HOPPE HLS 9000 top extension with swing hook to the version table: 41-5\/8\" (1058 mm), 54-5\/8\" (1388 mm), 68-11\/16\" (1745 mm) or 89-3\/8\" (2270 mm). A fitted extension may have been cut shorter at the top.\u003c\/p\u003e\u003ch4\u003eHow wide is the faceplate?\u003c\/h4\u003e\u003cp\u003eEvery HOPPE HLS 9000 top extension with swing hook has a 5\/8\" (16 mm) faceplate. Measure across the face of the metal strip on the door edge.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"41-5\/8\" (1058 mm) – 1 swing hook at 19-11\/16\" above handle","offer_id":50751621726405,"sku":"3868770","price":109.99,"currency_code":"USD","in_stock":true},{"title":"41-5\/8\" (1058 mm) – 1 swing hook at 35-7\/16\" above handle","offer_id":50751621759173,"sku":"3868796","price":119.99,"currency_code":"USD","in_stock":true},{"title":"54-5\/8\" (1388 mm) – 1 swing hook at 35-7\/16\" above handle","offer_id":50751621791941,"sku":"3868809","price":129.99,"currency_code":"USD","in_stock":true},{"title":"54-5\/8\" (1388 mm) – 2 swing hooks at 19-11\/16\" \u0026 35-7\/16\" above handle","offer_id":50751621824709,"sku":"3868817","price":129.99,"currency_code":"USD","in_stock":true},{"title":"68-11\/16\" (1745 mm) – 2 swing hooks at 23-5\/8\" \u0026 46-15\/16\" above handle","offer_id":50751621857477,"sku":"3868825","price":159.99,"currency_code":"USD","in_stock":true},{"title":"89-3\/8\" (2270 mm) – 2 swing hooks at 23-5\/8\" \u0026 59-1\/16\" above handle","offer_id":50751621890245,"sku":"3868833","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_2c46728b-5db7-4f2a-b1ec-925feea56bd0.png?v=1794081524"},{"product_id":"hoppe-hls-9000-middle-extension-with-tongue","title":"HOPPE middle extension with tongue, manual","description":"\u003cp\u003eA middle extension with tongue is a section of the operating drive rail. It attaches to the gear to reach the height of the door and carry the upper locking points. HOPPE calls this the Extension. Match your part number, or pick by faceplate width, length and locking point height. HOPPE combines extensions with the gear for a complete lock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e Pick 5\/8\" (16 mm) or 3\/4\" (20 mm) by version. Measure across the face of the metal strip on the door edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e From 13-7\/16\" (341 mm) to 80-3\/8\" (2041 mm) by version. Match the value in the version table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e 45-13\/16\" (1164 mm) to 95-1\/16\" (2414 mm) from the door bottom to the lowest tongue (HOPPE: 9-13\/16\" (250 mm) to 59-1\/16\" (1500 mm) above the handle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e Tongue on every version (2339358 has two). The shootbolt is on the top extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000, on every version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual, on every version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Not the whole lock. Goes between the gear and the shootbolt top extension (sold separately). A cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck the locking point. Every version on this page has a tongue. If your extension has rollers, a swing hook or a round bolt instead, it belongs on a different page.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. Pick 5\/8\" (16 mm) or 3\/4\" (20 mm). The 3\/4\" (20 mm) width comes in the 27-3\/16\" (691 mm), 44-15\/16\" (1141 mm) and 62-5\/8\" (1591 mm) lengths.\u003c\/li\u003e\n\u003cli\u003eCheck the length. HOPPE lists the overall length of the extension. Match the value in the version table.\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the lowest tongue on this section: 45-13\/16\" (1164 mm) to 95-1\/16\" (2414 mm). Subtract the 36\" (914 mm) handle height for HOPPE's figure in the table.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour extension has rollers instead of a tongue: HOPPE HLS® 9000 Roller + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eYour extension has a swing hook instead of a tongue: HOPPE HLS® 9000 Swing Hook + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eYour extension has a round bolt instead of a tongue: HOPPE HLS® 9000 Roundbolt + Shootbolt – Middle Extension\u003c\/li\u003e\n\u003cli\u003eYour middle extension has no locking point on it: HOPPE HLS® 9000 Shootbolt – Middle Extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs a HOPPE HLS 9000 middle extension with tongue the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. A HOPPE HLS 9000 middle extension with tongue is one section of the operating drive rail. HOPPE combines extensions with the gear for a complete lock. A cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eWhat does a HOPPE lock extension do?\u003c\/h4\u003e\u003cp\u003eA HOPPE extension is a section of the operating drive rail. It attaches to the gear to reach the height of the door and carry the upper locking points.\u003c\/p\u003e\u003ch4\u003eHow do I measure the faceplate width of a HOPPE HLS 9000 middle extension with tongue?\u003c\/h4\u003e\u003cp\u003eMeasure across the face of the metal strip on the door edge. The HOPPE HLS 9000 middle extension with tongue comes in 5\/8\" (16 mm) or 3\/4\" (20 mm) faceplate width, by version.\u003c\/p\u003e\u003ch4\u003eWhich length of HOPPE HLS 9000 middle extension with tongue do I need?\u003c\/h4\u003e\u003cp\u003eFor a HOPPE HLS 9000 middle extension with tongue, match the part number on your old part or its paperwork to the version table. Without a part number, match the length and locking point height to the version table. Lengths run from 13-7\/16\" (341 mm) to 80-3\/8\" (2041 mm), by version.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"5\/8\" (16 mm) \/ 32-13\/16\" (834 mm) – 1 tongue at 29-1\/4\" above handle","offer_id":50751640633541,"sku":"2002350","price":59.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 50-9\/16\" (1284 mm) – 1 tongue at 46-15\/16\" above handle","offer_id":50751640666309,"sku":"2002384","price":79.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 80-3\/8\" (2041 mm) – 2 tongues at 41-5\/16\" \u0026 76-3\/4\" above handle","offer_id":50751640699077,"sku":"2339358","price":119.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 13-7\/16\" (341 mm) – 1 tongue at 9-13\/16\" above handle","offer_id":50751640731845,"sku":"2344923","price":46.78,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 27-3\/16\" (691 mm) – 1 tongue at 23-5\/8\" above handle","offer_id":50751640764613,"sku":"8778703","price":79.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 44-15\/16\" (1141 mm) – 1 tongue at 41-5\/16\" above handle","offer_id":50751640797381,"sku":"8778707","price":69.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 62-5\/8\" (1591 mm) – 1 tongue at 59-1\/16\" above handle","offer_id":50751640830149,"sku":"8778711","price":79.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 29-1\/2\" (750 mm) – 1 tongue at 23-5\/8\" above handle","offer_id":50751640862917,"sku":"8779139","price":59.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 45-1\/2\" (1156 mm) – 1 tongue at 41-5\/16\" above handle","offer_id":50751640895685,"sku":"8779143","price":69.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 27-3\/16\" (691 mm) – 1 tongue at 23-5\/8\" above handle","offer_id":50751640928453,"sku":"2400577","price":48.88,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 44-15\/16\" (1141 mm) – 1 tongue at 41-5\/16\" above handle","offer_id":50751640961221,"sku":"2400593","price":69.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 62-5\/8\" (1591 mm) – 1 tongue at 59-1\/16\" above handle","offer_id":50751640993989,"sku":"2400606","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_fdc73739-f789-46ce-8da7-c5b5d3bd9a1c.png?v=1794081572"},{"product_id":"hoppe-hls-9000-top-extension-with-tongue-manual","title":"HOPPE top extension with tongue, manual, 1 or 2 tongues","description":"\u003cp\u003eThis lock extension with tongue is a section of the operating drive rail. It attaches to the gear to reach the height of the door and carries the upper locking points. HOPPE calls this the Extension. Pick by faceplate width, length and locking point height in the version table. Combine the extension with the gear for a complete lock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm) or 3\/4\" (20 mm), by version. Measure across the face of the metal strip on the door edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 41-1\/8\" (1045 mm) to 89-3\/8\" (2270 mm), by version, as printed in HOPPE's table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e 62\" (1575 mm) to 98-3\/4\" (2508 mm) from the door bottom, by version (HOPPE: 26\" (661 mm) to 62-3\/4\" (1594 mm) above the handle center).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock system:\u003c\/strong\u003e HOPPE HLS 9000, for swing (hinged) doors, on every version on this page.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e Tongue on every version. Some versions have two tongues; the version table gives the lower one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual on every version on this page.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Combine the extension with the gear for a complete lock. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck the locking points on the strip above the gear. This page has a tongue and manual operation. Rollers, swing hooks or shootbolts mean a different page.\u003c\/li\u003e\n\u003cli\u003eMeasure across the face of the metal strip on the door edge. Pick 5\/8\" (16 mm) or 3\/4\" (20 mm).\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the lowest tongue on the extension: 62\" (1575 mm) to 98-3\/4\" (2508 mm). Subtract the 36\" (914 mm) handle height to get HOPPE's figure in the version table.\u003c\/li\u003e\n\u003cli\u003eMatch the length to the version table, 41-1\/8\" (1045 mm) to 89-3\/8\" (2270 mm). A fitted extension may have been cut shorter at the top, so it can measure less.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour extension has rollers instead of a tongue: see HOPPE HLS® 9000 Four Roller – Top Extension or HOPPE HLS® 9000 Two Roller – Top Extension.\u003c\/li\u003e\n\u003cli\u003eYour extension has a swing hook instead of a tongue: see HOPPE HLS® 9000 Swing Hook – Top Extension.\u003c\/li\u003e\n\u003cli\u003eYour extension has a shootbolt instead of a tongue: see HOPPE HLS® 9000 Shootbolt – Top Extension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the whole lock?\u003c\/h4\u003e\u003cp\u003eNo, the HOPPE HLS 9000 lock extension with tongue is not the whole lock. It is one section of the operating drive rail. Combine the extension with the gear for a complete lock. Shootbolt locks add a middle extension, and a cover plate covers the seam.\u003c\/p\u003e\u003ch4\u003eWhat is this long metal strip above the lock called?\u003c\/h4\u003e\u003cp\u003eThe strip with a tongue above the gear on a HOPPE HLS 9000 lock is a lock extension with tongue. HOPPE calls it an Extension. It is also called a drive rail extension or top lock section.\u003c\/p\u003e\u003ch4\u003eHow do I measure the faceplate width?\u003c\/h4\u003e\u003cp\u003eMeasure the faceplate width of the HOPPE HLS 9000 lock extension with tongue across the face of the metal strip on the door edge. Versions come in 5\/8\" (16 mm) or 3\/4\" (20 mm).\u003c\/p\u003e\u003ch4\u003eHow do I find the locking point height?\u003c\/h4\u003e\u003cp\u003eMeasure from the door bottom up to the lowest tongue on the extension, then subtract the 36\" (914 mm) handle height. HOPPE lists 26\" (661 mm) to 62-3\/4\" (1594 mm) above the handle center, by version.\u003c\/p\u003e\u003ch4\u003eWhich length do I need?\u003c\/h4\u003e\u003cp\u003eMatch the length in the version table, 41-1\/8\" (1045 mm) to 89-3\/8\" (2270 mm) by version. It is the overall length of the extension as printed in HOPPE's table. A fitted extension may have been cut shorter at the top.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"5\/8\" (16 mm) \/ 56-1\/16\" (1424 mm) – 2 tongues at 26\" \u0026 49-1\/16\" above handle","offer_id":50751642468549,"sku":"2240631","price":99.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 82-3\/8\" (2093 mm) – 2 tongues at 37-3\/16\" \u0026 59-1\/16\" above handle","offer_id":50751642501317,"sku":"2949640","price":109.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 82-3\/8\" (2093 mm) – 2 tongues at 41-5\/16\" \u0026 72-13\/16\" above handle","offer_id":50751642534085,"sku":"3021229","price":109.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 41-5\/8\" (1058 mm) – 1 tongue at 29-1\/4\" above handle","offer_id":50751642566853,"sku":"3137707","price":59.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 78-11\/16\" (1998 mm) – 2 tongues at 37-3\/16\" \u0026 59-1\/16\" above handle","offer_id":50751642599621,"sku":"3387298","price":109.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 48-1\/16\" (1220 mm) – 1 tongue at 29-1\/4\" above handle","offer_id":50751642632389,"sku":"8778551","price":89.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 54-15\/16\" (1395 mm) – 1 tongue at 37-3\/16\" above handle","offer_id":50751642665157,"sku":"8778555","price":109.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 61-13\/16\" (1570 mm) – 1 tongue at 37-3\/16\" above handle","offer_id":50751642697925,"sku":"8778559","price":109.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 68-11\/16\" (1745 mm) – 1 tongue at 46-15\/16\" above handle","offer_id":50751642730693,"sku":"8778563","price":149.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 75-9\/16\" (1920 mm) – 1 tongue at 62-3\/4\" above handle","offer_id":50751642763461,"sku":"8778567","price":97.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 82-1\/2\" (2095 mm) – 1 tongue at 62-3\/4\" above handle","offer_id":50751642796229,"sku":"8778571","price":99.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\" (16 mm) \/ 89-3\/8\" (2270 mm) – 1 tongue at 62-3\/4\" above handle","offer_id":50751642828997,"sku":"8778575","price":99.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 41-1\/8\" (1045 mm) – 1 tongue at 29-1\/4\" above handle","offer_id":50751642861765,"sku":"2320956","price":59.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 48-1\/16\" (1220 mm) – 1 tongue at 29-1\/4\" above handle","offer_id":50751642894533,"sku":"2332973","price":119.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 54-15\/16\" (1395 mm) – 1 tongue at 37-3\/16\" above handle","offer_id":50751642927301,"sku":"2332990","price":89.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 61-13\/16\" (1570 mm) – 1 tongue at 37-3\/16\" above handle","offer_id":50751642960069,"sku":"2333010","price":89.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 68-11\/16\" (1745 mm) – 1 tongue at 46-15\/16\" above handle","offer_id":50751642992837,"sku":"2333036","price":119.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 75-9\/16\" (1920 mm) – 1 tongue at 62-3\/4\" above handle","offer_id":50751643025605,"sku":"2333052","price":119.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\" (20 mm) \/ 89-3\/8\" (2270 mm) – 1 tongue at 62-3\/4\" above handle","offer_id":50751643058373,"sku":"2333781","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_5aa653fb-d5c4-43e4-82fc-7fb53c12a713.png?v=1794081591"},{"product_id":"hoppe-hls-9000-top-extension-with-roller-16mm-faceplate","title":"HOPPE top extension with roller, 5\/8\" (16 mm) faceplate","description":"\u003cp\u003eThis lock extension with roller is a section of the operating drive rail that attaches to the gear to reach the height of the door and carry the upper locking points. HOPPE calls this the Extension. Pick by length, from 41-1\/8\" (1045 mm) to 68-11\/16\" (1745 mm), and check the locking point height, measured from the handle center. Combine it with the gear for a complete lock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Five choices by version, from 41-1\/8\" (1045 mm) to 68-11\/16\" (1745 mm), as printed in HOPPE's table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point height:\u003c\/strong\u003e By version: 64-3\/4\" (1644 mm) to 86-9\/16\" (2199 mm) from the door bottom (HOPPE: 28-3\/4\" (730 mm) to 50-9\/16\" (1285 mm) above the handle center).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut-off:\u003c\/strong\u003e 10-7\/8\" (276 mm) on 8778479 and 9-7\/8\" (251 mm) on 8778483. Not stated for the other versions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking point:\u003c\/strong\u003e One roller on the extension, on every version of this HOPPE HLS 9000 extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual on every version of this HOPPE HLS 9000 extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate width:\u003c\/strong\u003e 5\/8\" (16 mm) across the face of the metal strip on the door edge, on every version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Combine the extension with the gear for a complete lock. A cover plate covers the seam.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to tell if this is your part\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eMatch the part number on your old part or its paperwork to the version table.\u003c\/li\u003e\n\u003cli\u003eCheck the upper part of the faceplate strip above the gear. It must carry one roller, not two rollers, a tongue, swing hook or shootbolt.\u003c\/li\u003e\n\u003cli\u003eMeasure the faceplate width across the face of the metal strip on the door edge. It must be 5\/8\" (16 mm).\u003c\/li\u003e\n\u003cli\u003eCheck the length: match the version table, 41-1\/8\" (1045 mm) to 68-11\/16\" (1745 mm). A fitted extension may have been cut shorter at the top, so it can measure less.\u003c\/li\u003e\n\u003cli\u003eMeasure from the door bottom up to the roller: 64-3\/4\" (1644 mm), 72-5\/8\" (1844 mm), 80-11\/16\" (2049 mm) or 86-9\/16\" (2199 mm). Subtract the 36\" (914 mm) handle height for HOPPE's figure.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eThis isn't your part if\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour lock is automatic (the locking points throw when the door closes): HOPPE HLS® 9000 Automatic Two Roller – Top Extension\u003c\/li\u003e\n\u003cli\u003eYour extension has two rollers: HOPPE HLS® 9000 Four Roller – Top Extension\u003c\/li\u003e\n\u003cli\u003eYour lock's operation is Automatic and the top locking points are tongues: HOPPE HLS® 9000 Automatic Tongue – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe top locking points are tongues, not rollers: HOPPE HLS® 9000 Tongue – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe top locking points are swing hooks, not rollers: HOPPE HLS® 9000 Swing Hook – Top Extension\u003c\/li\u003e\n\u003cli\u003eThe top locking point is a shootbolt, not a roller: HOPPE HLS® 9000 Shootbolt – Top Extension\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs a lock extension the whole lock?\u003c\/h4\u003e\u003cp\u003eNo. A HOPPE HLS 9000 lock extension with roller is a section of the operating drive rail. Combine it with the gear for a complete lock.\u003c\/p\u003e\u003ch4\u003eWhat is the long metal strip above the lock on my door called?\u003c\/h4\u003e\u003cp\u003eOn a HOPPE HLS 9000 lock, the upper part of the faceplate strip above the gear, with the top locking points on it, is the extension. HOPPE calls it the Extension. Other names are drive rail extension and top lock section.\u003c\/p\u003e\u003ch4\u003eHow do I measure the locking point height?\u003c\/h4\u003e\u003cp\u003eMeasure from the door bottom up to the roller, then subtract the 36\" (914 mm) handle height. HOPPE lists 28-3\/4\" (730 mm), 36-5\/8\" (930 mm), 44-11\/16\" (1135 mm) or 50-9\/16\" (1285 mm) above the handle center.\u003c\/p\u003e\u003ch4\u003eWhich length of HOPPE HLS 9000 lock extension with roller do I need?\u003c\/h4\u003e\u003cp\u003ePick the HOPPE HLS 9000 lock extension with roller by part number or length: 41-1\/8\" (1045 mm), 48-1\/16\" (1220 mm), 54-15\/16\" (1395 mm), 61-13\/16\" (1570 mm) or 68-11\/16\" (1745 mm), as printed in HOPPE's table.\u003c\/p\u003e\u003ch4\u003eWhat faceplate width does the HOPPE HLS 9000 lock extension with roller have?\u003c\/h4\u003e\u003cp\u003eEvery version of the HOPPE HLS 9000 lock extension with roller has a 5\/8\" (16 mm) faceplate width, measured across the face of the metal strip on the door edge.\u003c\/p\u003e","brand":"HOPPE","offers":[{"title":"41-1\/8\" (1045 mm) – 1 roller at 28-3\/4\" above handle","offer_id":50751645253829,"sku":"8778479","price":59.99,"currency_code":"USD","in_stock":true},{"title":"48-1\/16\" (1220 mm) – 1 roller at 36-5\/8\" above handle","offer_id":50751645286597,"sku":"8778483","price":89.99,"currency_code":"USD","in_stock":true},{"title":"54-15\/16\" (1395 mm) – 1 roller at 44-11\/16\" above handle","offer_id":50751645319365,"sku":"8778487","price":89.99,"currency_code":"USD","in_stock":true},{"title":"61-13\/16\" (1570 mm) – 1 roller at 50-9\/16\" above handle","offer_id":50751645352133,"sku":"8778491","price":79.99,"currency_code":"USD","in_stock":true},{"title":"68-11\/16\" (1745 mm) – 1 roller at 50-9\/16\" above handle","offer_id":50751645384901,"sku":"8778495","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/6703\/2005\/files\/card_ef8a4f4a-3539-44e2-a047-a3acac07b69e.png?v=1794081611"}],"url":"https:\/\/shootbolt.com\/collections\/multipoint-lock-extensions.oembed","provider":"Shootbolt","version":"1.0","type":"link"}