10 products · 23 versions
Multipoint Lock Spindles, Screws & Small Parts
Multipoint lock spindles, screws and small parts: the pieces that go missing or wear out, from handle spindles to seam covers.
Not sure which part? Use our instant part identifier
Nothing matches every filter.
Before you order: 3 checks
A spindle is also called a handle shaft, a split spindle a two-piece spindle and a hex wrench an Allen key; HOPPE's own names for the seam cover and the screws are Cover Plate, Screws for Vinyl Profiles and Screws for Wood Profiles.
Loose handle? Tighten the set screw first
A loose handle wobbles but still springs back level. Tighten the set screw under the lever, often with a 3 mm hex key on HOPPE. If it is still loose, look at the spindle: a worn or rounded spindle can make the handle feel loose even when the gearbox is fine.
Wood door or vinyl door
HOPPE lists separate screws for vinyl doors and for wood doors. The screws for vinyl doors have a 1/4" (7 mm) head and the screws for wood doors have a 5/16" (8 mm) head. Check what your door is made of, then match the length.
Split spindle or solid spindle
The spindle on this page is the two-piece split kind. HOPPE lists a separate solid spindle for its Dallas and Atlanta handles. Check that your old spindle comes out in two pieces, then match its length.
Compare the 10 small parts
What you choose on each page, how many versions it has and where its price starts. Every part number is in the list below.
| Part | You choose | Versions | From |
|---|---|---|---|
| HOPPE split handle spindle (two-piece), 5/16" (8 mm), 3-3/4" to 6-5/16" long | Length: 6 choices | 6 | $20.99 |
| HOPPE dust cap, black, for latch and deadbolt or tongue strike | One version | 1 | $4.99 |
| HOPPE extension seam cover plate, 37×16 mm | One version | 1 | $16.99 |
| HOPPE construction handle, zinc plated steel | One version | 1 | $3.32 |
| HOPPE stainless steel screws for wood doors, 8 mm head | Version: 5 choices | 5 | $0.62 |
| HOPPE stainless steel screws for vinyl doors, 7 mm head | Version: 3 choices | 3 | $0.12 |
| HOPPE construction set, construction handle set for swing doors | Version: 2 choices | 2 | $69.99 |
| HOPPE 3 mm hex wrench (Allen key), for auto release roller | One version | 1 | $0.75 |
| HOPPE construction key, works the deadbolt before trim is fitted | Version: Black, Long version, blue | 2 | $15.15 |
| HOPPE foam Eurogroove plug, for behind the faceplate | One version | 1 | $0.33 |
Part numbers on this page
- HOPPE split handle spindle (two-piece), 5/16" (8 mm), 3-3/4" to 6-5/16" long517565, 517572, 517589, 517596, 519200, 665556
- HOPPE dust cap, black, for latch and deadbolt or tongue strike8786547
- HOPPE extension seam cover plate, 37×16 mm2875118
- HOPPE construction handle, zinc plated steel2426890
- HOPPE stainless steel screws for wood doors, 8 mm head8785687, 8785691, 8785695, 8785699, 8785703
- HOPPE stainless steel screws for vinyl doors, 7 mm head8785667, 8785671, 8785675
- HOPPE construction set, construction handle set for swing doors2604801, 2605353
- HOPPE 3 mm hex wrench (Allen key), for auto release roller8773799
- HOPPE construction key, works the deadbolt before trim is fitted2667482, 8750635
- HOPPE foam Eurogroove plug, for behind the faceplate1963538
Spindles, screws and fitting parts for multipoint locks
Handle spindles
The spindle is the square bar that runs through the door and turns the gearbox when you move the handle. HOPPE handle sets for HLS 9000 locks use an 8 mm spindle. A worn or rounded spindle can make the handle feel loose even when the gearbox is fine, so it is worth checking before you replace anything bigger. The two-piece split spindle is listed with its lengths on its product page.
Screws, covers and plugs
Screws for wood and for vinyl door profiles, the seam cover plate for the joint between lock sections, dust caps and foam Eurogroove plugs are the small parts that finish a repair neatly. They are easy to lose when a lock comes out of the door, and the right screw holds the faceplate flat so the bolts line up with their strikes.
Construction parts
A construction handle, construction key and construction set let builders work the lock before the final handles and cylinder go on, and the 3 mm hex wrench is here too. For cylinders, thumb-turn knobs and the cylinder screws, see the Euro profile cylinders page.
Guides for this page
Written from the manufacturers' own catalogs and installation sheets.
Questions
Which spindles & small parts do I need?
If you have the part number, from the box label or the paperwork that came with the door, search it above. HOPPE does not print part numbers on the parts themselves, so otherwise match the measurements on each product page. Not sure? Use our instant part identifier to confirm the part before you order.
What size spindle does a HOPPE multipoint handle use?
5/16" (8 mm). That is the spindle HOPPE handle sets for HLS 9000 locks use: the square bar that runs through the door and turns the gearbox when you move the handle. The two-piece split spindle comes in six lengths, from 3-3/4" (95 mm) to 6-5/16" (160 mm). HOPPE makes several lengths to suit different door thicknesses, so match the length of your old spindle, or the part number on the paperwork that came with the door.
What is a split spindle, and when do I need one?
A split spindle is a handle spindle made in two pieces instead of one solid bar. HOPPE's catalog says the two-piece spindle has a groove that takes the set screw in the handle, so it is usually the one for handles held on by a set screw. HOPPE lists a separate solid spindle for its Dallas and Atlanta handles. Before you order the split spindle, check that your old one is in two pieces, then match its length.
What is a construction key?
A construction key works the deadbolt before the handles and cylinder are fitted. It goes into the gearbox during installation, and HOPPE's installation steps use it with a construction handle to check that a newly fitted lock locks and unlocks. The HOPPE construction key comes in two versions, a short black one and a long blue one, from $15.15. HOPPE also lists a construction handle set that includes one.
Which screws hold a multipoint lock in a vinyl door?
HOPPE's screws for vinyl doors. HOPPE describes them as stainless steel screws with a 1/4" (7 mm) head, and they come in three lengths: 3/4" (19 mm), 7/8" (22 mm) and 1" (25 mm), from $0.12. A wood door takes a different screw with a 5/16" (8 mm) head, so check what your door is made of first. The right screw holds the faceplate flat so the bolts line up with their strikes.
Every order: free US shipping · 90-day free returns with a prepaid label · if our part identifier said it fits and it doesn't, we pay the return. Shipping · Returns









