Free US shipping90-day free returns · prepaid labelFit Guarantee · how it works
Shootbolt Instant identifierIdentify part

1 products · 6 versions

Single-Point Locks

Single-point locks lock the door at the handle only, with a latch and a deadbolt and no bolts at the top or bottom.

Not sure which part? Use our instant part identifier

Filter
Not sure which part? Instant identifier or send us a photo.
Backset
1 products

Part numbers on this page

Single-point door locks

When a single-point lock is right

A single-point lock holds the door with a latch and a deadbolt at the handle. It suits doors built for a single-point lock. A door built for a multipoint lock has strikes at the top and bottom too, and needs multipoint parts to lock there.

Backset and deadbolt throw

The HOPPE HLS 9000 single-point lock comes in 1-3/8" (35 mm), 1-3/4" (45 mm), 2-3/8" (60 mm) and 2-3/4" (70 mm) backsets, with a 9/16" (14 mm) or 1" (25.4 mm) deadbolt throw. Measure from the face of the metal strip on the door edge to the center of the handle hole.

Handles and cylinder

The lock is sold without handles and cylinder. It takes HOPPE handle sets for HLS 9000 locks and a Euro profile cylinder.

Choosing the right one

How to read the options you will see on these products.

Backset

How far the handle sits from the edge of the door: from the face of the metal strip on the door edge (the faceplate) to the center of the handle hole. HOPPE HLS 9000 locks come in 1-3/8" (35 mm), 1-3/4" (45 mm, the standard), 2-3/8" (60 mm) and 2-3/4" (70 mm).

How to measure: Open the door. Measure from the face of the metal strip on the door edge to the center of the square handle spindle hole.

Throw

How far the bolt sticks out of the faceplate when it's locked. HOPPE dead bolts throw 1" (25.4 mm) or 9/16" (14 mm); shootbolts throw 3/4" (20 mm) or 1" (25.4 mm).

How to measure: Lock the door while it's open and measure how far the bolt sticks out past the faceplate.

Questions

Which single-point locks do I need?

If you have the part number, from the box label or the paperwork that came with the door, search it above. HOPPE does not print part numbers on the parts themselves, so otherwise match the measurements in the guide above. Not sure? Use our instant part identifier to confirm the part before you order.

Every order: free US shipping · 90-day free returns with a prepaid label · if our part identifier said it fits and it doesn't, we pay the return. Shipping · Returns

Help identify my part

Send the part number, measurements or photos of your old hardware. We’ll review your request and reply by email within 1 business day.

Your photos are stored privately and used to help identify your part. Privacy policy