Free US shipping90-day free returns · prepaid labelFit Guarantee · how it works
Shootbolt Instant identifierIdentify part

16 products · 281 versions

Multipoint Lock Handle Sets

Multipoint lock handle sets are the handles and plates on both sides of the door. Match the lock, then pick the style and finish.

Not sure which part? Use our instant part identifier

Filter
Not sure which part? Instant identifier or send us a photo.
Door
16 products

Before you order: 3 checks

A handle set is also called a handleset, trim or a trim set, and the long plates behind the handles are called backplates by HOPPE and escutcheon plates by some door makers.

  1. Loose handle? Tighten the set screw

    A loose handle wobbles but still springs back level. Tighten the set screw under the lever, often with a 3 mm hex key on HOPPE. If that cures it, you do not need a new handle set.

  2. Drooping? Push the bare spindle

    Take the inside handle off, push the square spindle down gently with your fingers and let go. If it springs back level, the gearbox is working and the handle set is the part; if it stays down, a worn gearbox is the likely cause on a HOPPE lock. This is a quick check locksmiths use, not a HOPPE instruction.

  3. Need only the knob or the spindle?

    The inside thumb-turn knob, from $34.87, and the two-piece spindle, from $20.99, are sold on their own. The knob is only the knob on the inside of a Euro profile cylinder, not the cylinder itself, and its 4 mm set screw is sold separately.

Compare the 16 handle sets

What you choose on each page, how many versions it has and where its price starts. Every part number is in the list below.

PartYou chooseVersionsFrom
HOPPE München door handle set, 1-3/8" (35.6 mm) narrow plateDoor: 5 choices · Finish: 10 choices41$149.99
HOPPE Dallas door handle set, 1-1/2" (38 mm) plateDoor: 3 choices · Finish: 5 choices15$169.99
HOPPE Verona door handle set, 1-1/4" (31 mm) narrow plateDoor: 5 choices · Finish: 9 choices45$169.99
HOPPE München door handle set, 1-1/4" (31 mm) narrow plateDoor: 5 choices · Finish: 7 choices32$159.99
HOPPE Ródos door handle set, 1-1/4" (31 mm) narrow plateDoor: 5 choices · Finish: 7 choices29$159.99
HOPPE München door handle set, 2-3/16" (55 mm) wide plateDoor: 2 choices · Finish: Matte Black, Resista® Polished Brass, Resista® Satin Nickel, Rustic Umber8$229.99
HOPPE Frankfurt door handle set, 1-3/16" (30 mm) aluminum plateDoor: 3 choices · Finish: Chestnut, Pure White, Silver8$189.99
HOPPE Toronto door handle set, 1-3/8" (35.6 mm) narrow plateDoor: 5 choices · Finish: 6 choices24$179.99
HOPPE Toronto door handle set, 2-3/16" (55 mm) wide plateDoor: 2 choices · Finish: Resista® Brushed Chrome, Rustic Umber3$259.99
HOPPE Dallas 4600 sliding door handle set for HLS 9000 locksDoor thickness: 1-3/4", 2-1/4" · Version: 4 choices · Finish: Alpine Frost, Matte Black, Rustic Umber24$239.99
HOPPE London door handle set, 1-3/16" (30 mm) aluminum plateDoor: 2 choices2$139.99
HOPPE Dallas 4600 sliding door handle set, dummy (no lock)Door thickness: 1-3/4", 2-1/4" · Version: 2 choices · Finish: Alpine Frost, Matte Black, Rustic Umber12$249.99
HOPPE Dallas 4600 sliding door handle set, for Amesbury Gemini/single point, Truth NexusVersion: 4 choices · Finish: Alpine Frost, Matte Black, Rustic Umber12$239.99
HOPPE Atlanta door handle set, 1-1/4" (31 mm) narrow plateFinish: Matte Black, Resista® Satin Nickel2$269.99
HOPPE Dallas 4600 sliding door handle set for Ashland Sentinel locksVersion: 4 choices · Finish: Alpine Frost, Matte Black, Rustic Umber12$239.99
HOPPE Dallas 4600 sliding door handle set for Ashland Sentinel narrow locksVersion: 4 choices · Finish: Alpine Frost, Matte Black, Rustic Umber12$239.99
All 281 part numbers on this page

Door handle sets for multipoint locks

Match the lock behind the handles

A handle set has to line up with the gearbox it turns. HOPPE handle sets for HLS 9000 locks have 3-5/8" (92 mm) between the center of the handle and the center of the cylinder hole, and use an 8 mm spindle. Measure that distance on your door before you choose a style: if it isn't 3-5/8", these sets won't line up with your lock.

Keyed set, thumbturn set or fixed handles

Swing-door sets come as a keyed set for the main door, with a keyed cylinder outside; a thumbturn set for the second door of a pair, with no key outside and a thumb-turn half cylinder inside; and fixed handles that don't move a latch. Many also come without the cylinder, for when you keep the one you have. The product page shows which versions each style is made in.

Plate styles and finishes

München, Verona, Ródos, Toronto, Dallas, Frankfurt, London and Atlanta differ in handle shape and plate: narrow plates 1-1/4" wide, shaped plates 1-3/8" or 2-3/16" wide, a square plate and aluminum plates. Finishes include matte black, oil-rubbed brass, antique brass and HOPPE's Resista® finishes. Sliding patio doors take the Dallas 4600 sets on their own page.

Choosing the right one

How to read the options you will see on these products.

Which door

• Keyed set (main door) (HOPPE: Active): key outside, thumb-turn inside, both handles turn. Both plates have a cylinder hole for a keyed cylinder. • Thumbturn set, no key outside (second door) (HOPPE: Inactive): both handles turn; a thumb-turn on the inside plate locks it, and the outside plate has no cylinder hole (half cylinder). You may also use a keyed set on the second door. • Fixed handles (second door) (HOPPE: Fixed Dummy): the handles don't move; they are pulls, usually on a door held shut by flush bolts. No cylinder hole on either plate.

Finish

The color and coating. The code in brackets is HOPPE's finish code. Resista® (codes ending -R) is HOPPE's protective finish.

Door thickness

Handle sets and cylinders are made for a door thickness. Most entry doors are 1-3/4"; HOPPE also makes 2-1/4" versions.

How to measure: Measure across the edge of the door.

Sliding door hand

Stand outside, facing the door. • Left hand (XO): the sliding panel is on the left, the fixed panel on the right. • Right hand (OX): the sliding panel is on the right, the fixed panel on the left.

Questions

Which handle sets do I need?

If you have the part number, from the box label or the paperwork that came with the door, search it above. HOPPE does not print part numbers on the parts themselves, so otherwise match the measurements in the guide above. Not sure? Use our instant part identifier to confirm the part before you order.

Can I replace the handles without replacing the lock?

Yes. A handle set is the handles, the plates behind them and their screws, and it comes off without taking the lock out of the door edge. The new set has to suit the lock: every swing-door set here is for HOPPE HLS 9000 locks with 3-5/8" (92 mm) from handle center to cylinder center and a 5/16" (8 mm) spindle. Many sets also come without the cylinder, for when you keep the one you have. If the handle droops, check the gearbox before you buy handles.

Are HOPPE handle sets interchangeable between styles?

On the lock, yes. Every swing-door set here is for HOPPE HLS 9000 locks with 3-5/8" (92 mm) spacing and a 5/16" (8 mm) spindle. On the door, check the plate. Plate widths run from 1-3/16" (30 mm) to 2-3/16" (55 mm) and the lengths differ too, so measure your old plate, and where its screws sit, before you change style.

Which handle set do I need for the second door of a French pair?

It depends on how the second door locks. If it has its own lock worked by the handle, such as the HOPPE inactive gearbox, choose the thumbturn set: both handles turn, a thumb-turn locks it from inside and there is no key outside. If the door is held shut by flush bolts, choose fixed handles, which are pulls that don't move. You may also use a keyed set on the second door. Not every style comes in all three, so check the product page.

Do HOPPE handle sets come with the key cylinder?

Some do. Swing-door sets are sold by version: keyed cylinder included, thumb-turn half cylinder included, or cylinder not included, for when you keep the one you have. Dallas, Frankfurt, London and the 2-3/16" (55 mm) wide-plate sets include the cylinder on every main door and second door version. Atlanta does not include one. Fixed handles have no cylinder hole. Cylinders are also sold on their own: the keyed cylinder from $99.99 and the thumb-turn half cylinder from $89.99.

What does PZ 92 mean on a handle set?

PZ is the distance from the center of the handle hole to the center of the cylinder hole. PZ 92 means 3-5/8" (92 mm), HOPPE's standard for its swing-door handle sets. Measure it on your door from the center of the handle spindle to the center of the key cylinder. If it isn't 3-5/8", these sets won't line up with your lock. Fixed handle sets have no cylinder holes, so they have no PZ. More terms are in the multipoint lock glossary.

Every order: free US shipping · 90-day free returns with a prepaid label · if our part identifier said it fits and it doesn't, we pay the return. Shipping · Returns

Help identify my part

Send the part number, measurements or photos of your old hardware. We’ll review your request and reply by email within 1 business day.

Your photos are stored privately and used to help identify your part. Privacy policy