
Backset
From the face of the faceplate to the center of the handle hole.
Choose 1-3/8", 1-3/4", 2-3/8" or 2-3/4".Shop by part type
Replacement partsGearboxesExtension rodsStrike platesFrench door flush boltsSpindles & small partsEuro cylindersView all replacement partsComplete locks & hardware
Complete locksSingle-point locksHandle setsSliding patio door handle setsAdjustable hingesShop by brand
HOPPEHOPPE gearbox (lock case only)Start with a symptom
Handle droops or won't liftDoor won't lock at the top or bottomLatch doesn't catch the frameSecond door of a pair won't lockKey turns stiffly or spinsIdentify your part
Have a stamped number? Start there. Look along the door edge.
Search a stamped numberInstant identifierHow to measureView all partsMultipoint locks, made simple.
Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details
90-day free returnsPrepaid return label, no restocking fee.
Estimated delivery: 1–4 business daysIn stock · ships within 1 business day
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
All the numbers. In one place.
Start with the lock you have. Find the replacement that matches.
The HOPPE HLS 9000 single-point lock keeps things simple: a latch holds the door shut and a deadbolt locks it. There are no locking points above or below the handle.
HOPPE offers it as a cost-effective alternative to a multipoint lock where you want to use HOPPE handle sets. It comes as a complete lock, with its stainless steel faceplate attached.
Compare the specifications here, then match your backset and deadbolt throw in the table below. Most repairs keep the handles already on the door.
For swing doors with a manual lock, a latch and deadbolt only, and a 5/8" (16 mm) faceplate with rounded ends. Locking points above or below the handle and a square-ended faceplate mean a multipoint lock, which this lock won't replace.
Your size. Your exact part.
Read across one row to find your measurements and part number.
6 versions
Swipe the table sideways to see part numbers, prices and Choose buttons.
| Backset | Deadbolt throw | Part number | Price | Select version |
|---|---|---|---|---|
| 1-3/8" (35 mm) | 9/16" (14 mm) | 11517463 | $99.99 | |
| 1-3/8" (35 mm) | 1" (25.4 mm) | 11517475 | $119.99 | |
| 1-3/4" (45 mm) | 9/16" (14 mm) | 11517487 | $129.99 | |
| 1-3/4" (45 mm) | 1" (25.4 mm) | 11517499 | $129.99 | |
| 2-3/8" (60 mm) | 1" (25.4 mm) | 11517505 | $129.99 | |
| 2-3/4" (70 mm) | 1" (25.4 mm) | 11517517 | $119.99 |

Replace the lock. Keep the rest.
The whole lock comes as one part. Match it to your old one, and the rest of the hardware on your door can stay if it's undamaged.
REPLACEThe complete lockLock body, faceplate, latch and deadbolt in one unit.
REUSEYour existing hardwareHandles, cylinder and strike, if undamaged. These are sold separately if you need new ones.
Rounded faceplate ends? On HOPPE HLS 9000 doors, rounded ends with a latch and deadbolt only mean this lock. Square ends with locking points above or below the handle mean a multipoint lock.
Measure it once. Choose it with confidence.
Backset and deadbolt throw choose the version. Handle spacing confirms the match.

From the face of the faceplate to the center of the handle hole.
Choose 1-3/8", 1-3/4", 2-3/8" or 2-3/4".
How far the fully extended deadbolt projects past the faceplate.
Choose 9/16" (14 mm) or 1" (25.4 mm).
Center of the handle hole to center of the cylinder hole.
Must be 3-5/8" (92 mm).Measure with the door open. Put the deadbolt out, then use the face of the faceplate as your reference. Have the part number, from the box label or the door's paperwork? Match it in the table above.
Made for this repair
A simple lock for a simple job. The HOPPE HLS 9000 single-point lock sits in the door edge behind the handle, with one latch and one deadbolt on a rounded 5/8" (16 mm) faceplate. Match the backset and deadbolt throw to your old lock, and confirm the 3-5/8" (92 mm) handle-to-cylinder spacing. It comes as a complete lock, so there is no separate case or faceplate to pair up. Handles, the cylinder and the strike are sold separately, and undamaged ones can stay in service. It's a straightforward door-lock repair that keeps the hardware you know on your door.
See the six versions
Most repairs keep the handles already on the door. If yours are worn or you want a new look, any HOPPE HLS 9000 swing-door handle set fits this lock: same 3-5/8" (92 mm) handle-to-cylinder spacing and 8 mm spindle. HOPPE makes these sets for a 1-3/4" thick door. Thicker door? Ask us.
Fits this lock (3-5/8" / 92 mm PZ, 8 mm spindle) · check the fit
Fits this lock (3-5/8" / 92 mm PZ, 8 mm spindle) · check the fit
Fits this lock (3-5/8" / 92 mm PZ, 8 mm spindle) · check the fit
Fits this lock (3-5/8" / 92 mm PZ, 8 mm spindle) · check the fit
Fits this lock (3-5/8" / 92 mm PZ, 8 mm spindle) · check the fit
Fits this lock (3-5/8" / 92 mm PZ, 8 mm spindle) · check the fit
Each set's full page: München, Shaped Narrow Plate, 1-3/8" wide · Dallas, Square Plate, 1-1/2" wide · Verona, Narrow Plate, 1-1/4" wide · Matching key cylinder · All 16 handle sets
Before you order
A single-point lock and a multipoint gearbox are not interchangeable. If your door looks like one of these, you need a different part.
Locking points above or below the handle and a square-ended faceplate, on a manual, current-style HLS 9000: HOPPE Multipoint Lock Replacement Gearbox for HLS 9000 (Lock Case Only).
On a manual multipoint lock, when the faceplate strip or the locking point below the handle is damaged as well: HOPPE gearbox with lower tongue, 5/8" (16 mm) faceplate.
A multipoint lock whose locking points engage by themselves: HOPPE gearbox with lower tongue, automatic.
No latch or deadbolt on that door: HOPPE inactive gearbox for the second door.
The Shootbolt difference
In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.
Shipping details ↗A prepaid return label and no restocking fee. Time to check your part and plan the repair.
Returns details ↗We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.
How the guarantee works ↗Written from the manufacturers' own catalogs and installation sheets.
No, they are not interchangeable. This lock has a latch and deadbolt only, on a rounded 5/8" (16 mm) faceplate. For a manual, current-style HOPPE HLS 9000 multipoint lock with a square-ended faceplate, see HOPPE Multipoint Lock Replacement Gearbox for HLS 9000 (Lock Case Only).
1-3/8" (35 mm) backset: 11517463 has a 9/16" (14 mm) throw; 11517475 has 1" (25.4 mm). 1-3/4" (45 mm): 11517487 has 9/16" (14 mm); 11517499 has 1" (25.4 mm). 2-3/8" (60 mm): 11517505. 2-3/4" (70 mm): 11517517. The last two have a 1" (25.4 mm) throw.
Some seller listings call the shorter throw 1/2". HOPPE gives it as .55" (14 mm), which we show as 9/16" (14 mm). It is the throw on 11517463 and 11517487.
In M/45/25 16R, 45 is a 1-3/4" (45 mm) backset and 25 a 1" (25.4 mm) deadbolt throw. 16R is a 5/8" (16 mm) faceplate with rounded ends. That version is HOPPE part 11517499.
HOPPE defines it as a mortise lock with a latch and deadbolt only. HOPPE offers it as a cost-effective alternative to a multipoint lock where you want to use HOPPE handle sets.
No. HOPPE lists the lock on its own. Handles, the cylinder and the strike are separate products.
No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.
Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.