
Backset
Open the door. Measure from the face of the metal strip on the door edge to the center of the square handle spindle hole.
Choose 1-3/8", 1-3/4".Shop by part type
Replacement partsGearboxesExtension rodsStrike platesFrench door flush boltsSpindles & small partsEuro cylindersView all replacement partsComplete locks & hardware
Complete locksSingle-point locksHandle setsSliding patio door handle setsAdjustable hingesShop by brand
HOPPEHOPPE gearbox (lock case only)Start with a symptom
Handle droops or won't liftDoor won't lock at the top or bottomLatch doesn't catch the frameSecond door of a pair won't lockKey turns stiffly or spinsIdentify your part
Have a stamped number? Start there. Look along the door edge.
Search a stamped numberInstant identifierHow to measureView all partsMultipoint locks, made simple.
Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details
90-day free returnsPrepaid return label, no restocking fee.
Estimated delivery: 8–10 business daysBackordered · ships in 7 business days
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
Specifications / a quick match
Start with the part you have. Find the version that matches.
This multipoint gearbox with lower tongue holds the hub the handle turns and the deadbolt, with a tongue lower on the faceplate. HOPPE calls this the Gear, or lockcase. The multipoint engages by itself when the door closes; a manual gear needs the lever lifted. Pick by backset, deadbolt throw and tongue position. HOPPE sells the gear and top extension separately.
A HOPPE HLS 9000 gearbox (the case behind the handle), already attached to the lower extension with a tongue. The top extension, handles, key cylinder and frame strikes are sold separately.
This is one of 15 HOPPE HLS 9000 gearboxes, and they do not swap with each other. Run the checks under "Is it my part?" below before you order.
Codes and descriptions the manufacturer and sellers use for this product family. Search any of them to find the part.
gearbox · gear box · lock case · lock body · multipoint gearbox · 8778243 · 8778247 · 8778267 · 8778271 · 8778287 · 8778291 · 8778303 · Automatic Tongue / A/35/14 / 914 / TN1 / 671 / 16-SC / 115 · Automatic Tongue / A/35/14 / 914 / TN1 / 753 / 16-SC / 30 · Automatic Tongue / A/35/25 / 914 / TN1 / 671 / 16-SC / 115 · Automatic Tongue / A/35/25 / 914 / TN1 / 753 / 16-SC / 30 · Automatic Tongue / A/45/14 / 914 / TN1 / 671 / 16-SC / 115 · Automatic Tongue / A/45/25 / 914 / TN1 / 671 / 16-SC / 115 · Automatic Tongue / A/45/25 / 914 / TN1 / 753 / 16-SC / 30
Is it my part?
6 checks with the door open. Match all of them to one row of the version table.

The repair
A handle that droops, won't spring back up or needs force to lift, and a key that turns stiffly, usually point to the gearbox rather than to the bolts.
REPLACEThe gearbox on its lower extensionThe case behind the handle, already attached to the lower extension with a tongue.
REUSEThe rest of your lock, if undamagedYour top extension, handles, key cylinder and frame strikes can stay on the door. Each is sold separately if it needs replacing.
7 available versions
Match the measurements on your existing lock, not just its looks. Read across one row.
7 versions
Swipe the table sideways to see part numbers, prices and Choose buttons.
| Backset | Deadbolt throw | Lower locking point | Part number | Price | Select version |
|---|---|---|---|---|---|
| 1-3/8" (35 mm) | 9/16" (14 mm) | 26-7/16" (671 mm) below handle | 8778271 | $189.99 | |
| 1-3/8" (35 mm) | 9/16" (14 mm) | 29-5/8" (753 mm) below handle | 8778267 | $189.99 | |
| 1-3/8" (35 mm) | 1" (25.4 mm) | 26-7/16" (671 mm) below handle | 8778247 | $189.99 | |
| 1-3/8" (35 mm) | 1" (25.4 mm) | 29-5/8" (753 mm) below handle | 8778243 | $169.99 | |
| 1-3/4" (45 mm) | 9/16" (14 mm) | 26-7/16" (671 mm) below handle | 8778303 | $189.99 | |
| 1-3/4" (45 mm) | 1" (25.4 mm) | 26-7/16" (671 mm) below handle | 8778291 | $139.99 | |
| 1-3/4" (45 mm) | 1" (25.4 mm) | 29-5/8" (753 mm) below handle | 8778287 | $189.99 |
Match your measurements, then choose a version.
The whole lock, by door height
This gearbox is the lower piece of a two-piece lock: gearbox + top extension. The door-height box by the price picks the top extension from your door's measured height; this table is the same answer in print.
HOPPE's rule: the two pieces together are as long as the door is tall, with the handle 36" (914 mm) up from the bottom of the door. Each row is the range of door heights HOPPE prints for that top extension. Where two rows reach the same door, the right one puts its locking points where the strike plates already sit in your frame.
| Part no. | Length | Locking points above the handle center | Door heights it reaches | Price |
|---|---|---|---|---|
| 8778579 | 41-1/8" (1045 mm) | 1 tongue at 29-1/4" | 71-1/16" to 78-3/4" (1805 to 2000 mm) | $69.99 |
| 8778583 | 48-1/16" (1220 mm) | 1 tongue at 29-1/4" | 71-1/16" to 85-5/8" (1805 to 2175 mm) | $89.99 |
| 8778587 | 54-15/16" (1395 mm) | 1 tongue at 37-3/16" | 79-1/8" to 92-1/2" (2010 to 2350 mm) | $99.99 |
| 8778591 | 61-13/16" (1570 mm) | 1 tongue at 37-3/16" | 79-1/8" to 99-7/16" (2010 to 2525 mm) | $89.99 |
| 8778595 | 68-11/16" (1745 mm) | 1 tongue at 46-15/16" | 88-3/4" to 106-5/16" (2255 to 2700 mm) | $119.99 |
| 8778607 | 89-3/8" (2270 mm) | 1 tongue at 62-3/4" | 104-1/2" to 126-15/16" (2655 to 3225 mm) | $179.99 |
Measure the door itself, top edge to bottom edge, not the frame and not the size on the paperwork. Door heights are the range HOPPE gives for each top extension, the same figures the door-height box uses.
Choose with confidence
Measure with the door open. Each measurement is one choice in the version table.

Open the door. Measure from the face of the metal strip on the door edge to the center of the square handle spindle hole.
Choose 1-3/8", 1-3/4".
Lock the door while it's open and measure how far the bolt sticks out past the faceplate.
Choose 9/16" (14 mm) or 1" (25.4 mm).
Measure from the center of the square handle spindle to the center of the key cylinder hole.
Must be 3-5/8" (92 mm).Not sure? Send us your measurements or a photo and we reply by email within 1 business day.
The bolt below the handle (tongue, roller, swing hook or round bolt). HOPPE gives its position from the center of the handle hole, down to the center of that bolt.
How to measure: With the door open, measure from the center of the handle hole down to the center of the bolt below it, and match HOPPE's figure.
Matched on the lock family and handle spacing; check the fit before you order. Scroll sideways for more.
Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit
Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit
Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit
Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit
Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit
Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit
Optional
Most repairs keep the handles already on the door. If yours are worn or you want a new look, any HOPPE HLS 9000 swing-door handle set fits this gearbox: same 3-5/8" (92 mm) handle-to-cylinder spacing and 8 mm spindle. HOPPE makes these sets for a 1-3/4" thick door; main-door versions shown. Thicker door? Ask us.
Each set's full page: München, Shaped Narrow Plate, 1-3/8" wide · Dallas, Square Plate, 1-1/2" wide · Verona, Narrow Plate, 1-1/4" wide · Matching key cylinder · All 16 handle sets
Strikes, extensions, cylinders and small parts from the manufacturers' catalogs and fit rules. Scroll sideways for more.
Latch & deadbolt strike for the center of this lock · check the fit
Frame strikes for the automatic bolts on this lock · check the fit
Frame strikes for the automatic bolts on this lock · check the fit
Frame strikes for the tongue bolts on this lock · check the fit
Complete lock: this gear + top extension. Hoppe sells them separately; pick the same faceplate width.
The Shootbolt difference
In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.
Shipping details ↗A prepaid return label and no restocking fee. Time to check your part and plan the repair.
Returns details ↗We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.
How the guarantee works ↗Written from the manufacturers' own catalogs and installation sheets.
Usually, when the droop is in the gearbox. Take the inside handle off and push the bare square spindle down: if it stays down, a worn gearbox is the likely cause on a HOPPE lock; if it springs back level, the handle set is the part.
No, the HOPPE HLS 9000 automatic gearbox with lower tongue is the main lock body. HOPPE sells the gear and the top extension separately; together they make the complete lock. Handles, cylinder and strikes are separate products.
No, the HOPPE HLS 9000 automatic gearbox with lower tongue engages the multipoint by itself when the door closes. A lower-tongue gear that needs the lever lifted is the HOPPE gearbox with lower tongue, 5/8" (16 mm) faceplate.
On a fitted door with the HOPPE HLS 9000 automatic gearbox with lower tongue, measure from the bottom of the door up to the center of the tongue: 6-5/16" (161 mm) or 9-9/16" (243 mm), by version.
HOPPE lists the lower tongue on the HLS 9000 automatic gearbox from the center of the handle hole down to the center of the tongue: 29-5/8" (753 mm) or 26-7/16" (671 mm). That is not a height from the bottom of the door.
An automatic HOPPE HLS 9000 gear with a roller below the handle is a different part: see HOPPE gearbox with lower roller, automatic. The automatic gearbox with lower tongue has a tongue there.
No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.
Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.