Free US shipping90-day free returns · prepaid labelFit Guarantee · how it works
Shootbolt Instant identifierIdentify part
HOPPE gearbox with lower tongue, 3/4" (20 mm) faceplate: dimension drawing
HOPPE gearbox with lower tongue, 3/4" (20 mm) faceplate: full drawing with the side view
Complete lock: this part with its matching pieces
1 / 3
HOPPE HLS 9000Part no. —

HOPPE gearbox with lower tongue, 3/4" (20 mm) faceplate

$149.99–$279.99
Backset
Deadbolt throw
Lower locking point

Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details

90-day free returnsPrepaid return label, no restocking fee.

Estimated delivery: 8–10 business daysBackordered · ships in 7 business days

  • Visa
  • Mastercard
  • American Express
  • Discover
  • PayPal
  • Apple Pay
  • Google Pay

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Specifications / a quick match

Specs & what's included

Start with the part you have. Find the version that matches.

What this part is

This multipoint gearbox with lower tongue is the main body of a HOPPE HLS 9000 lock: it holds the hub the handle turns and the deadbolt, with a tongue lower on a 3/4" (20 mm) faceplate and no shootbolt. HOPPE calls this the gear (lockcase). Check that your faceplate is 3/4" (20 mm) wide, then pick by backset, deadbolt throw, tongue position and maximum cut-off. Top extension sold separately.

A HOPPE HLS 9000 gearbox (the case behind the handle), already attached to the lower extension with a tongue. The top extension, handles, key cylinder and frame strikes are sold separately.

Check the system, too.

This is one of 15 HOPPE HLS 9000 gearboxes, and they do not swap with each other. Run the checks under "Is it my part?" below before you order.

Brand & series
HOPPE · HLS 9000
Part supplied
HOPPE gearbox + lower extension with a tongue. Top extension separate.
Backset
  • 1-3/8″ 35 mm
  • 1-3/4″ 45 mm
  • 2-3/8″ 60 mm
  • 2-3/4″ 70 mm
Deadbolt throw
  • 9/16″ 14 mm
  • 1″ 25.4 mm
Lower locking point, up from door bottom
6-5/16" (161 mm), 9-9/16" (243 mm) or 11-9/16" (294 mm) from door bottom to tongue center, by version.
Maximum cut-off
1-3/16" (30 mm), 2-3/8" (60 mm), 4-1/2" (115 mm) or 6-5/16" (160 mm), by version; match the version table.
Faceplate width
3/4" (20 mm) across the face of the metal strip on the door edge.
Operation
Manual: lift the lever to engage the multipoint, then turn the thumb-turn or key to extend the deadbolt.
Assembly
Gear only. HOPPE sells the top extension separately; handles, cylinder and strikes are separate products.
Handle-to-cylinder centers (PZ)
3-5/8″ (92 mm)
Handle height
36″ (914 mm) up from the door bottom
Gear length
37-5/8″ (955 mm)
Latch handing
Reversible to suit the door
Not included
  • Top extension
  • Handles & spindle
  • Cylinder & strikes
Manufacturer catalog codes (33)

Codes and descriptions the manufacturer and sellers use for this product family. Search any of them to find the part.

gearbox · gear box · lock case · lock body · multipoint gearbox · 2320948 · 2320972 · 2320981 · 2332316 · 2332324 · 2332341 · 2332359 · 2332367 · 2406400 · 2406418 · 2406434 · 2406442 · 2406451 · 2406469 · Tongue 20 mm / M/35/25 / 914 / TN1 / 620 / 20-SC / 160 · Tongue 20 mm / M/35/25 / 914 / TN1 / 671 / 20-SC / 115 · Tongue 20 mm / M/35/25 / 914 / TN1 / 753 / 20-SC / 30 · Tongue 20 mm / M/45/14 / 914 / TN1 / 671 / 20-SC / 115 · Tongue 20 mm / M/45/14 / 914 / TN1 / 753 / 20-SC / 30 · Tongue 20 mm / M/45/25 / 914 / TN1 / 620 / 20-SC / 160 · Tongue 20 mm / M/45/25 / 914 / TN1 / 671 / 20-SC / 115 · Tongue 20 mm / M/45/25 / 914 / TN1 / 753 / 20-SC / 30 · Tongue 20 mm / M/60/25 / 914 / TN1 / 620 / 20-SC / 160 · Tongue 20 mm / M/60/25 / 914 / TN1 / 671 / 20-SC / 115 · Tongue 20 mm / M/60/25 / 914 / TN1 / 753 / 20-SC / 60 · Tongue 20 mm / M/70/25 / 914 / TN1 / 620 / 20-SC / 160 · Tongue 20 mm / M/70/25 / 914 / TN1 / 671 / 20-SC / 115 · Tongue 20 mm / M/70/25 / 914 / TN1 / 753 / 20-SC / 60

Is it my part?

How to tell if this is your part

6 checks with the door open. Match all of them to one row of the version table.

What to check

  1. Have the part number, from the box label or the door's paperwork? Match it to the version table.
  2. Look at the faceplate: the deadbolt is level with the handle, a tongue is lower down, and there is no shootbolt. Check that the multipoint engages when you lift the lever. Measure across the face of the metal strip on the door edge: it must be 3/4" (20 mm).
  3. Measure backset from the face of the lock faceplate to the center of the handle hole: 1-3/8" (35 mm), 1-3/4" (45 mm), 2-3/8" (60 mm) or 2-3/4" (70 mm).
  4. Measure deadbolt throw, how far the deadbolt sticks out past the faceplate when it is locked: 9/16" (14 mm) or 1" (25.4 mm).
  5. Measure from the bottom of the door up to the center of the tongue: 6-5/16" (161 mm), 9-9/16" (243 mm) or 11-9/16" (294 mm). HOPPE's figures from the center of the handle hole down are 29-5/8" (753 mm), 26-7/16" (671 mm) and 24-7/16" (620 mm), in that order.
  6. Match backset, deadbolt throw and tongue position together in one row of the version table. For maximum cut-off, match the value in the version table. Check handle height, 36" (914 mm) from the bottom of the door panel to the center of the handle hole.

This isn't your part if

The complete lock: this gearbox with its matching pieces
HOPPE HLS 9000 · gearbox with lower tongue, 3/4" (20 mm) faceplate
THE LOWER PIECE OF A TWO-PIECE LOCK.

The repair

When this is the part to replace

A handle that droops, won't spring back up or needs force to lift, and a key that turns stiffly, usually point to the gearbox rather than to the bolts.

REPLACEThe gearbox on its lower extensionThe case behind the handle, already attached to the lower extension with a tongue.

REUSEThe rest of your lock, if undamagedYour top extension, handles, key cylinder and frame strikes can stay on the door. Each is sold separately if it needs replacing.

Only the case failed? If the faceplate and the tongue below the handle are fine, the HOPPE gearbox only (lock case) fits onto the strip you have. It ships within 1 business day.

Check first: it may not be the gearbox.
  • Lock it with the door open. Hold in the trigger (the small spring plunger beside the latch), lift the handle and turn the thumb-turn. If it locks easily open but not shut, the door is out of line: look at the strike plates and hinges first.
  • Loose is not drooping. A handle that wobbles but springs back level needs its set screw tightened, often with a 3 mm hex key.
  • Push the bare spindle. With the inside handle off, push the square spindle down and let go. If it springs back level, the handle set is the part, not this one.

14 available versions

Versions, part numbers and prices

Match the measurements on your existing lock, not just its looks. Read across one row.

14 versions

Swipe the table sideways to see part numbers, prices and Choose buttons.

Read across one row. Choose a row to update the buy box.
BacksetDeadbolt throwLower locking pointPart numberPriceSelect version
1-3/8" (35 mm)1" (25.4 mm)24-7/16" (620 mm) below handle2332324$169.99
1-3/8" (35 mm)1" (25.4 mm)26-7/16" (671 mm) below handle2320981$199.99
1-3/8" (35 mm)1" (25.4 mm)29-5/8" (753 mm) below handle2332359$209.99
1-3/4" (45 mm)9/16" (14 mm)26-7/16" (671 mm) below handle2320972$169.99
1-3/4" (45 mm)9/16" (14 mm)29-5/8" (753 mm) below handle2332341$149.99
1-3/4" (45 mm)1" (25.4 mm)24-7/16" (620 mm) below handle2332316$169.99
1-3/4" (45 mm)1" (25.4 mm)26-7/16" (671 mm) below handle2320948$169.99
1-3/4" (45 mm)1" (25.4 mm)29-5/8" (753 mm) below handle2332367$179.99
2-3/8" (60 mm)1" (25.4 mm)24-7/16" (620 mm) below handle2406400$179.99
2-3/8" (60 mm)1" (25.4 mm)26-7/16" (671 mm) below handle2406418$239.99
2-3/8" (60 mm)1" (25.4 mm)29-5/8" (753 mm) below handle2406434$239.99
2-3/4" (70 mm)1" (25.4 mm)24-7/16" (620 mm) below handle2406442$209.99
2-3/4" (70 mm)1" (25.4 mm)26-7/16" (671 mm) below handle2406451$279.99
2-3/4" (70 mm)1" (25.4 mm)29-5/8" (753 mm) below handle2406469$279.99

Match your measurements, then choose a version.

The whole lock, by door height

Door heights this lock reaches

This gearbox is the lower piece of a two-piece lock: gearbox + top extension. The door-height box by the price picks the top extension from your door's measured height; this table is the same answer in print.

HOPPE's rule: the two pieces together are as long as the door is tall, with the handle 36" (914 mm) up from the bottom of the door. Each row is the range of door heights HOPPE prints for that top extension. Where two rows reach the same door, the right one puts its locking points where the strike plates already sit in your frame.

5/8" (16 mm) faceplate: top extension with tongue, manual, 1 or 2 tongues
Part no.LengthLocking points above the handle centerDoor heights it reachesPrice
313770741-5/8" (1058 mm)1 tongue at 29-1/4"71-1/16" to 79-1/4" (1805 to 2013 mm)$59.99
877855148-1/16" (1220 mm)1 tongue at 29-1/4"71-1/16" to 85-5/8" (1805 to 2175 mm)$89.99
877855554-15/16" (1395 mm)1 tongue at 37-3/16"79-1/8" to 92-1/2" (2010 to 2350 mm)$109.99
877855961-13/16" (1570 mm)1 tongue at 37-3/16"79-1/8" to 99-7/16" (2010 to 2525 mm)$109.99
877856368-11/16" (1745 mm)1 tongue at 46-15/16"88-3/4" to 106-5/16" (2255 to 2700 mm)$149.99
224063156-1/16" (1424 mm)2 tongues at 26" & 49-1/16"90-7/8" to 93-11/16" (2309 to 2379 mm)$99.99
338729878-11/16" (1998 mm)2 tongues at 37-3/16" & 59-1/16"100-7/8" to 116-1/4" (2563 to 2953 mm)$109.99
294964082-3/8" (2093 mm)2 tongues at 37-3/16" & 59-1/16"100-7/8" to 120" (2563 to 3048 mm)$109.99
877856775-9/16" (1920 mm)1 tongue at 62-3/4"104-1/2" to 113-3/16" (2655 to 2875 mm)$97.99
877857182-1/2" (2095 mm)1 tongue at 62-3/4"104-1/2" to 120-1/16" (2655 to 3050 mm)$99.99
877857589-3/8" (2270 mm)1 tongue at 62-3/4"104-1/2" to 126-15/16" (2655 to 3225 mm)$99.99
302122982-3/8" (2093 mm)2 tongues at 41-5/16" & 72-13/16"114-11/16" to 120" (2913 to 3048 mm)$109.99
3/4" (20 mm) faceplate: top extension with tongue, manual, 1 or 2 tongues
Part no.LengthLocking points above the handle centerDoor heights it reachesPrice
232095641-1/8" (1045 mm)1 tongue at 29-1/4"71-1/16" to 78-3/4" (1805 to 2000 mm)$59.99
233297348-1/16" (1220 mm)1 tongue at 29-1/4"71-1/16" to 85-5/8" (1805 to 2175 mm)$119.99
233299054-15/16" (1395 mm)1 tongue at 37-3/16"79-1/8" to 92-1/2" (2010 to 2350 mm)$89.99
233301061-13/16" (1570 mm)1 tongue at 37-3/16"79-1/8" to 99-7/16" (2010 to 2525 mm)$89.99
233303668-11/16" (1745 mm)1 tongue at 46-15/16"88-3/4" to 106-5/16" (2255 to 2700 mm)$119.99
233305275-9/16" (1920 mm)1 tongue at 62-3/4"104-1/2" to 113-3/16" (2655 to 2875 mm)$119.99
233378189-3/8" (2270 mm)1 tongue at 62-3/4"104-1/2" to 126-15/16" (2655 to 3225 mm)$119.99

Measure the door itself, top edge to bottom edge, not the frame and not the size on the paperwork. Door heights are the range HOPPE gives for each top extension, the same figures the door-height box uses.

Choose with confidence

How to measure

Measure with the door open. Each measurement is one choice in the version table.

Backset: from the faceplate face to the center of the square handle spindle hole
01

Backset

Open the door. Measure from the face of the metal strip on the door edge to the center of the square handle spindle hole.

Choose 1-3/8", 1-3/4", 2-3/8", 2-3/4".
Throw: how far the deadbolt sticks out past the faceplate
02

Throw

Lock the door while it's open and measure how far the bolt sticks out past the faceplate.

Choose 9/16" (14 mm) or 1" (25.4 mm).
PZ: from the center of the handle spindle hole to the center of the cylinder hole
03

Handle spacing (PZ)

Measure from the center of the square handle spindle to the center of the key cylinder hole.

Must be 3-5/8" (92 mm).

Not sure? Send us your measurements or a photo and we reply by email within 1 business day.

Handle sets for this lock

Matched on the lock family and handle spacing; check the fit before you order. Scroll sideways for more.

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 1-3/8" (35.6 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $149.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Dallas door handle set, 1-1/2" (38 mm) plate
Door
Fixed handles (second door) / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $169.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Verona door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $169.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $159.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Ródos door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $159.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 2-3/16" (55 mm) wide plate
Door
Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $229.99Free US shipping

Optional

Replacing your handles too?

Most repairs keep the handles already on the door. If yours are worn or you want a new look, any HOPPE HLS 9000 swing-door handle set fits this gearbox: same 3-5/8" (92 mm) handle-to-cylinder spacing and 8 mm spindle. HOPPE makes these sets for a 1-3/4" thick door; main-door versions shown. Thicker door? Ask us.

Accessories and matching parts

Strikes, extensions, cylinders and small parts from the manufacturers' catalogs and fit rules.

Complete lock: this gear + top extension. Hoppe sells them separately; pick the same faceplate width.

Latch & deadbolt strike for the center of this lock · check the fit

Frame strikes for the tongue bolts on this lock · check the fit

Plan the repair

How it is replaced

About 20 minutes. Keep the door open until every locking point has been tested.

Time and toolsAbout 20 minutes

A hand Phillips screwdriver, hex keys (often 3 mm on HOPPE) and a board to lay the old and new parts side by side.

  1. Open and unlock

    Thumb-turn or key back first, then the handle down. The door stays open until the last step.

  2. Cylinder and handles out

    Remove the long screw in the door edge below the deadbolt, turn the key until the cylinder slides out, then undo the handle screws and pull out the square spindle.

  3. Free the gearbox

    Remove the faceplate screws, then undo the joint between the gearbox and the extension above it. Ease the gearbox down and out.

  4. Compare old and new

    On a board, handle holes lined up: backset, faceplate width, deadbolt throw and tongue height must agree. Latch facing the wrong way? Pull it out, turn it half a turn, let it spring back, and turn the trigger to match.

  5. Fit the new gearbox

    Slide it in, hook the extension's drive rail into it so the teeth mesh fully, and refasten the joint. Faceplate screws go in hand-tight, heads flush.

  6. Refit and test, door open

    Spindle, handles, cylinder. Hold in the trigger, lift the handle and turn the thumb-turn: every bolt should move freely and go back in. Only then close the door.

Four don'ts
  • No power driver. Too much force binds the drive rail.
  • Leave every Torx or tri-wing screw in the gearbox body: they hold the case together under spring pressure.
  • Don't overtighten: hand-tight, heads flush.
  • Don't close the door until the lock has passed the door-open test.

These steps follow Therma-Tru's installation packet for the HOPPE HLS 9000 and HOPPE's hardware catalog.

The Shootbolt difference

A better part. A little peace of mind.

Free US shipping

In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.

Shipping details ↗

90-day free returns

A prepaid return label and no restocking fee. Time to check your part and plan the repair.

Returns details ↗

Fit Guarantee

We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.

How the guarantee works ↗

Questions

Will a new gearbox fix a drooping handle?

Usually, when the droop is in the gearbox. Take the inside handle off and push the bare square spindle down: if it stays down, a worn gearbox is the likely cause on a HOPPE lock; if it springs back level, the handle set is the part. If only the case has failed and the faceplate and lower tongue are fine, the gearbox only (lock case) is the smaller repair.

How is this different from the HOPPE HLS 9000 Tongue – Gear?

The HOPPE HLS 9000 gearbox with lower tongue and 3/4" (20 mm) faceplate differs in faceplate width from the HOPPE gearbox with lower tongue, 5/8" (16 mm) faceplate, which has a 5/8" (16 mm) faceplate. Measure across the face of the metal strip on the door edge.

Is this the whole multipoint lock?

No, the HOPPE HLS 9000 gearbox with lower tongue and 3/4" (20 mm) faceplate is the gear only. HOPPE sells the gear and the top extension separately; together they make the complete lock. Handles, cylinder and strikes are separate products.

Where do I measure the tongue position?

On the HOPPE HLS 9000 gearbox with lower tongue and 3/4" (20 mm) faceplate, measure door bottom up to tongue center: 6-5/16" (161 mm), 9-9/16" (243 mm) as on part 2320948, or 11-9/16" (294 mm). HOPPE measures from the handle center down: 29-5/8" (753 mm), 26-7/16" (671 mm) or 24-7/16" (620 mm).

Does it lock by itself when the door closes?

No, the HOPPE HLS 9000 gearbox with lower tongue and 3/4" (20 mm) faceplate is manual: lift the lever to engage the multipoint, then turn the thumb-turn or key to extend the deadbolt. A gear that engages by itself is the HOPPE gearbox with lower tongue, automatic.

No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.

Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.

Help identify my part

Send the part number, measurements or photos of your old hardware. We’ll review your request and reply by email within 1 business day.

Your photos are stored privately and used to help identify your part. Privacy policy