Free US shipping90-day free returns · prepaid labelFit Guarantee · how it works
Shootbolt Instant identifierIdentify part
HOPPE gearbox with lower round bolt, bolt 9-11/16" (246 mm) up from door bottom: dimension drawing
HOPPE gearbox with lower round bolt, bolt 9-11/16" (246 mm) up from door bottom: full drawing with the side view
Complete lock: this part with its matching pieces
1 / 3
HOPPE HLS 9000Part no. —

HOPPE gearbox with lower round bolt, bolt 9-11/16" (246 mm) up from door bottom

$199.99–$279.99
Backset

Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details

90-day free returnsPrepaid return label, no restocking fee.

Estimated delivery: 8–10 business daysBackordered · ships in 7 business days

  • Visa
  • Mastercard
  • American Express
  • Discover
  • PayPal
  • Apple Pay
  • Google Pay

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Specifications / a quick match

Specs & what's included

Start with the part you have. Find the version that matches.

What this part is

This multipoint gearbox with lower round bolt holds the hub the handle turns and the deadbolt, with a round bolt lower on the faceplate. HOPPE calls this the Gear, or lockcase. It has no shootbolt; the round bolt sits 9-11/16" (246 mm) up from the door bottom. Pick by backset. HOPPE sells the gear and top extension separately.

A HOPPE HLS 9000 gearbox (the case behind the handle), already attached to the lower extension with a round bolt. The top extension, handles, key cylinder and frame strikes are sold separately.

Check the system, too.

This is one of 15 HOPPE HLS 9000 gearboxes, and they do not swap with each other. Run the checks under "Is it my part?" below before you order.

Brand & series
HOPPE · HLS 9000
Part supplied
HOPPE gearbox + lower extension with a round bolt. Top extension separate.
Backset
  • 1-3/8″ 35 mm
  • 1-3/4″ 45 mm
  • 2-3/8″ 60 mm
  • 2-3/4″ 70 mm
Locking point on the gear (below the handle)
Round bolt.
Lower locking point, up from door bottom
9-11/16" (246 mm), to the center of the round bolt.
Lower locking point, below handle center
26-5/16" (668 mm), down from the center of the handle hole.
Deadbolt throw
1" (25.4 mm): how far the deadbolt sticks out past the faceplate when locked.
Operation
Manual: lift the lever to engage the multipoint, then turn the thumb-turn or key to extend the deadbolt.
Assembly
HOPPE sells the gear and the top extension separately. Handles, cylinder and strikes are separate products.
Maximum cut-off
5-1/2" (140 mm)
Handle-to-cylinder centers (PZ)
3-5/8″ (92 mm)
Latch handing
Reversible to suit the door
Not included
  • Top extension
  • Handles & spindle
  • Cylinder & strikes
Manufacturer catalog codes (13)

Codes and descriptions the manufacturer and sellers use for this product family. Search any of them to find the part.

gearbox · gear box · lock case · lock body · multipoint gearbox · 2942245 · 2942253 · 8778139 · 8778259 · Roundbolt / M/35/25 / 914 / RB1 / 668 / 16-SC / 140 · Roundbolt / M/45/25 / 914 / RB1 / 668 / 16-SC / 140 · Roundbolt / M/60/25 / 914 / RB1 / 668 / 16-SC / 140 · Roundbolt / M/70/25 / 914 / RB1 / 668 / 16-SC / 140

Is it my part?

How to tell if this is your part

5 checks with the door open. Match all of them to one row of the version table.

What to check

  1. Have the part number, from the box label or the door's paperwork? Match it to the version table.
  2. Check for a round bolt below the handle and no shootbolt. A shootbolt is an arrow-shaped bolt that shoots up or down into the head or sill of the frame. Check that the lever must be lifted to engage the multipoint.
  3. Measure from the bottom of the door up to the center of the round bolt: 9-11/16" (246 mm). HOPPE lists this as 26-5/16" (668 mm) below the handle center.
  4. Measure the backset from the face of the lock faceplate to the center of the handle hole. Pick 1-3/8" (35 mm), 1-3/4" (45 mm), 2-3/8" (60 mm) or 2-3/4" (70 mm).
  5. Check the shared sizes: 5/8" (16 mm) faceplate with square ends, handle height 36" (914 mm) from the door bottom to the handle hole center, PZ 3-5/8" (92 mm).

This isn't your part if

The complete lock: this gearbox with its matching pieces
HOPPE HLS 9000 · gearbox with lower round bolt, bolt 9-11/16" (246 mm) up from doo
THE LOWER PIECE OF A TWO-PIECE LOCK.

The repair

When this is the part to replace

A handle that droops, won't spring back up or needs force to lift, and a key that turns stiffly, usually point to the gearbox rather than to the bolts.

REPLACEThe gearbox on its lower extensionThe case behind the handle, already attached to the lower extension with a round bolt.

REUSEThe rest of your lock, if undamagedYour top extension, handles, key cylinder and frame strikes can stay on the door. Each is sold separately if it needs replacing.

Only the case failed? If the faceplate and the round bolt below the handle are fine, the HOPPE gearbox only (lock case) fits onto the strip you have. It ships within 1 business day.

Check first: it may not be the gearbox.
  • Lock it with the door open. Hold in the trigger (the small spring plunger beside the latch), lift the handle and turn the thumb-turn. If it locks easily open but not shut, the door is out of line: look at the strike plates and hinges first.
  • Loose is not drooping. A handle that wobbles but springs back level needs its set screw tightened, often with a 3 mm hex key.
  • Push the bare spindle. With the inside handle off, push the square spindle down and let go. If it springs back level, the handle set is the part, not this one.

4 available versions

Versions, part numbers and prices

Match the measurements on your existing lock, not just its looks. Read across one row.

4 versions

Swipe the table sideways to see part numbers, prices and Choose buttons.

Read across one row. Choose a row to update the buy box.
BacksetPart numberPriceSelect version
1-3/8" (35 mm)8778259$199.99
1-3/4" (45 mm)8778139$279.99
2-3/8" (60 mm)2942245$249.99
2-3/4" (70 mm)2942253$279.99

Choose with confidence

How to measure

Measure with the door open. Each measurement is one choice in the version table.

Backset: from the faceplate face to the center of the square handle spindle hole
01

Backset

Open the door. Measure from the face of the metal strip on the door edge to the center of the square handle spindle hole.

Choose 1-3/8", 1-3/4", 2-3/8", 2-3/4".
PZ: from the center of the handle spindle hole to the center of the cylinder hole
02

Handle spacing (PZ)

Measure from the center of the square handle spindle to the center of the key cylinder hole.

Must be 3-5/8" (92 mm).

Not sure? Send us your measurements or a photo and we reply by email within 1 business day.

Handle sets for this lock

Matched on the lock family and handle spacing; check the fit before you order. Scroll sideways for more.

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 1-3/8" (35.6 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $149.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Dallas door handle set, 1-1/2" (38 mm) plate
Door
Fixed handles (second door) / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $169.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Verona door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $169.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $159.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Ródos door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $159.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 2-3/16" (55 mm) wide plate
Door
Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $229.99Free US shipping

Optional

Replacing your handles too?

Most repairs keep the handles already on the door. If yours are worn or you want a new look, any HOPPE HLS 9000 swing-door handle set fits this gearbox: same 3-5/8" (92 mm) handle-to-cylinder spacing and 8 mm spindle. HOPPE makes these sets for a 1-3/4" thick door; main-door versions shown. Thicker door? Ask us.

Accessories and matching parts

Strikes, extensions, cylinders and small parts from the manufacturers' catalogs and fit rules.

Latch & deadbolt strike for the center of this lock · check the fit

Complete lock: this gear + top extension. Hoppe sells them separately; pick the same faceplate width.

Frame strikes for the roundbolt bolts on this lock · check the fit

Plan the repair

How it is replaced

About 20 minutes. Keep the door open until every locking point has been tested.

Time and toolsAbout 20 minutes

A hand Phillips screwdriver, hex keys (often 3 mm on HOPPE) and a board to lay the old and new parts side by side.

  1. Open and unlock

    Thumb-turn or key back first, then the handle down. The door stays open until the last step.

  2. Cylinder and handles out

    Remove the long screw in the door edge below the deadbolt, turn the key until the cylinder slides out, then undo the handle screws and pull out the square spindle.

  3. Free the gearbox

    Remove the faceplate screws, then undo the joint between the gearbox and the extension above it. Ease the gearbox down and out.

  4. Compare old and new

    On a board, handle holes lined up: backset, faceplate width, deadbolt throw and round bolt height must agree. Latch facing the wrong way? Pull it out, turn it half a turn, let it spring back, and turn the trigger to match.

  5. Fit the new gearbox

    Slide it in, hook the extension's drive rail into it so the teeth mesh fully, and refasten the joint. Faceplate screws go in hand-tight, heads flush.

  6. Refit and test, door open

    Spindle, handles, cylinder. Hold in the trigger, lift the handle and turn the thumb-turn: every bolt should move freely and go back in. Only then close the door.

Four don'ts
  • No power driver. Too much force binds the drive rail.
  • Leave every Torx or tri-wing screw in the gearbox body: they hold the case together under spring pressure.
  • Don't overtighten: hand-tight, heads flush.
  • Don't close the door until the lock has passed the door-open test.

These steps follow Therma-Tru's installation packet for the HOPPE HLS 9000 and HOPPE's hardware catalog.

The Shootbolt difference

A better part. A little peace of mind.

Free US shipping

In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.

Shipping details ↗

90-day free returns

A prepaid return label and no restocking fee. Time to check your part and plan the repair.

Returns details ↗

Fit Guarantee

We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.

How the guarantee works ↗

Questions

Will a new gearbox fix a drooping handle?

Usually, when the droop is in the gearbox. Take the inside handle off and push the bare square spindle down: if it stays down, a worn gearbox is the likely cause on a HOPPE lock; if it springs back level, the handle set is the part. If only the case has failed and the faceplate and lower round bolt are fine, the gearbox only (lock case) is the smaller repair.

Is this the whole lock?

No, the HOPPE HLS 9000 gearbox with lower round bolt is the main lock body. HOPPE sells the gear and the top extension separately; together they make the complete lock. Handles, cylinder and strikes are separate products.

How do I tell it from the Roundbolt + Shootbolt gear?

The HOPPE HLS 9000 gearbox with lower round bolt has no shootbolt; its round bolt is 9-11/16" (246 mm) up from the door bottom. The HOPPE gearbox with lower round bolt and shootbolt, bolt 11-9/16" (294 mm) up has a shootbolt and its round bolt at 11-9/16" (294 mm).

Which part number goes with each backset?

For the HOPPE HLS 9000 gearbox with lower round bolt: 1-3/8" (35 mm) is 8778259, 1-3/4" (45 mm) is 8778139, 2-3/8" (60 mm) is 2942245 and 2-3/4" (70 mm) is 2942253. Measure from the faceplate face to the handle hole center.

Why does HOPPE list 26-5/16"?

HOPPE lists the round bolt on the HLS 9000 gearbox with lower round bolt from the center of the handle hole down: 26-5/16" (668 mm). From the bottom of the door it is 9-11/16" (246 mm), the easiest check on a fitted door.

No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.

Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.

Help identify my part

Send the part number, measurements or photos of your old hardware. We’ll review your request and reply by email within 1 business day.

Your photos are stored privately and used to help identify your part. Privacy policy