Free US shipping90-day free returns · prepaid labelFit Guarantee · how it works
Shootbolt Instant identifierIdentify part
HOPPE gearbox with lower round bolt and shootbolt, bolt 11-9/16" (294 mm) up: dimension drawing
HOPPE gearbox with lower round bolt and shootbolt, bolt 11-9/16" (294 mm) up: full drawing with the side view
Complete lock: this part with its matching pieces
1 / 3
HOPPE HLS 9000Part no. —

HOPPE gearbox with lower round bolt and shootbolt, bolt 11-9/16" (294 mm) up

$209.99–$389.99
Backset

Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details

90-day free returnsPrepaid return label, no restocking fee.

Estimated delivery: 8–10 business daysBackordered · ships in 7 business days

  • Visa
  • Mastercard
  • American Express
  • Discover
  • PayPal
  • Apple Pay
  • Google Pay

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Specifications / a quick match

Specs & what's included

Start with the part you have. Find the version that matches.

What this part is

This multipoint gearbox with lower round bolt and shootbolt holds the hub the handle turns and the deadbolt, with a round bolt lower on the faceplate and a shootbolt. HOPPE calls this the Gear, or lockcase. The round bolt sits 11-9/16" (294 mm) up from the door bottom. Pick by backset. HOPPE sells the gear and top extension separately; it also needs a middle extension.

A HOPPE HLS 9000 gearbox (the case behind the handle), already attached to the lower extension with a round bolt. The top extension (shootbolt locks also need a middle extension), handles, key cylinder and frame strikes are sold separately.

Check the system, too.

This is one of 15 HOPPE HLS 9000 gearboxes, and they do not swap with each other. Run the checks under "Is it my part?" below before you order.

Brand & series
HOPPE · HLS 9000
Part supplied
HOPPE gearbox + lower extension with a round bolt. Top extension separate.
Backset
  • 1-3/8″ 35 mm
  • 1-3/4″ 45 mm
  • 2-3/8″ 60 mm
Locking point on the gear (below the handle)
Round bolt, plus a shootbolt.
Lower locking point, up from door bottom
11-9/16" (294 mm), to the center of the round bolt.
Lower locking point, below handle center
24-7/16" (620 mm), down from the center of the handle hole.
Operation
Manual: lift the lever to engage the multipoint, then turn the thumb-turn or key to extend the deadbolt.
Deadbolt throw
1" (25.4 mm): how far the deadbolt sticks out past the faceplate when locked.
Assembly
HOPPE sells the gear and the top extension separately; this shootbolt version also needs a middle extension.
Handle-to-cylinder centers (PZ)
3-5/8″ (92 mm)
Handle height
36″ (914 mm) up from the door bottom
Gear length
37-5/8″ (955 mm)
Latch handing
Reversible to suit the door
Not included
  • Middle & top extension
  • Handles & spindle
  • Cylinder & strikes
Manufacturer catalog codes (11)

Codes and descriptions the manufacturer and sellers use for this product family. Search any of them to find the part.

gearbox · gear box · lock case · lock body · multipoint gearbox · 2485283 · 8778751 · 8778755 · Roundbolt + Shootbolt / M/35/25 / 914 / RB1SB1 / 620 / 16-SC / 20 · Roundbolt + Shootbolt / M/45/25 / 914 / RB1SB1 / 620 / 16-SC / 20 · Roundbolt + Shootbolt / M/60/25 / 914 / RB1SB1 / 620 / 16-SC / 20

Is it my part?

How to tell if this is your part

5 checks with the door open. Match all of them to one row of the version table.

What to check

  1. Have the part number, from the box label or the door's paperwork? Match it to the version table.
  2. Check for a round bolt below the handle and a shootbolt. A shootbolt is an arrow-shaped bolt that shoots up or down into the head or sill of the frame. Check that the lever must be lifted to engage the multipoint.
  3. Measure from the bottom of the door up to the center of the round bolt: 11-9/16" (294 mm). HOPPE lists this as 24-7/16" (620 mm) below the handle center.
  4. Measure the backset from the face of the lock faceplate to the center of the handle hole. Pick 1-3/8" (35 mm), 1-3/4" (45 mm) or 2-3/8" (60 mm).
  5. Check the shared sizes: 5/8" (16 mm) faceplate with square ends, handle height 36" (914 mm) from the door bottom to the handle hole center, PZ 3-5/8" (92 mm).

This isn't your part if

The complete lock: this gearbox with its matching pieces
HOPPE HLS 9000 · gearbox with lower round bolt and shootbolt, bolt 11-9/16" (294 m
THE LOWER PIECE OF A THREE-PIECE LOCK.

The repair

When this is the part to replace

A handle that droops, won't spring back up or needs force to lift, and a key that turns stiffly, usually point to the gearbox rather than to the bolts.

REPLACEThe gearbox on its lower extensionThe case behind the handle, already attached to the lower extension with a round bolt.

REUSEThe rest of your lock, if undamagedYour top extension and middle extension, handles, key cylinder and frame strikes can stay on the door. Each is sold separately if it needs replacing.

Only the case failed? If the faceplate and the round bolt below the handle are fine, the HOPPE gearbox only (lock case) fits onto the strip you have. It ships within 1 business day.

Check first: it may not be the gearbox.
  • Lock it with the door open. Hold in the trigger (the small spring plunger beside the latch), lift the handle and turn the thumb-turn. If it locks easily open but not shut, the door is out of line: look at the strike plates and hinges first.
  • Loose is not drooping. A handle that wobbles but springs back level needs its set screw tightened, often with a 3 mm hex key.
  • Push the bare spindle. With the inside handle off, push the square spindle down and let go. If it springs back level, the handle set is the part, not this one.

3 available versions

Versions, part numbers and prices

Match the measurements on your existing lock, not just its looks. Read across one row.

3 versions

Swipe the table sideways to see part numbers, prices and Choose buttons.

Read across one row. Choose a row to update the buy box.
BacksetPart numberPriceSelect version
1-3/8" (35 mm)8778751$209.99
1-3/4" (45 mm)8778755$219.99
2-3/8" (60 mm)2485283$389.99

The whole lock, by door height

Door heights this lock reaches

This gearbox is the lower piece of a three-piece lock. The door-height box by the price picks the two upper pieces from your door's measured height; this table is the same answer in print.

HOPPE's rule: the three pieces together are as long as the door is tall, with the handle 36" (914 mm) up from the bottom of the door. The gearbox piece is 37-5/8" (955 mm). Each row counts every top extension below, cut or uncut. Several middle extensions can reach the same door: the right one puts its locking point where the strike plate already sits in your frame.

5/8" (16 mm) faceplate: middle extension with round bolt, 5/8" (16 mm) faceplate
Part no.LengthLocking points above the handle centerDoor heights it reachesPrice
877873927-3/16" (691 mm)1 roundbolt at 23-5/8"76-5/8" to 95-5/16" (1946 to 2421 mm)
97-5/16" to 101-1/4" (2471 to 2571 mm)
$139.99
877874344-15/16" (1141 mm)1 roundbolt at 41-5/16"94-5/16" to 113-1/16" (2396 to 2871 mm)
115" to 118-15/16" (2921 to 3021 mm)
$149.99
877874762-5/8" (1591 mm)1 roundbolt at 59-1/16"112-1/16" to 130-3/4" (2846 to 3321 mm)
132-11/16" to 136-5/8" (3371 to 3471 mm)
$119.99
3/4" (20 mm) faceplate: middle extension with round bolt, 5/8" (16 mm) faceplate
Part no.LengthLocking points above the handle centerDoor heights it reachesPrice
877873927-3/16" (691 mm)1 roundbolt at 23-5/8"76-5/8" to 95-5/16" (1946 to 2421 mm)$139.99
877874344-15/16" (1141 mm)1 roundbolt at 41-5/16"94-5/16" to 113-1/16" (2396 to 2871 mm)$149.99
877874762-5/8" (1591 mm)1 roundbolt at 59-1/16"112-1/16" to 130-3/4" (2846 to 3321 mm)$119.99
middle extension with round bolt, 5/8" (16 mm) faceplate
Part no.LengthLocking points above the handle centerDoor heights it reachesPrice
877873927-3/16" (691 mm)1 roundbolt at 23-5/8"76-5/8" to 95-5/16" (1946 to 2421 mm)
97-5/16" to 101-1/4" (2471 to 2571 mm)
$139.99
877874344-15/16" (1141 mm)1 roundbolt at 41-5/16"94-5/16" to 113-1/16" (2396 to 2871 mm)
115" to 118-15/16" (2921 to 3021 mm)
$149.99
877874762-5/8" (1591 mm)1 roundbolt at 59-1/16"112-1/16" to 130-3/4" (2846 to 3321 mm)
132-11/16" to 136-5/8" (3371 to 3471 mm)
$119.99
The 13 top extensions
Part no.FaceplateLengthCan be cut by up toPrice
87786115/8"15-3/4" (400 mm)3-15/16" (100 mm)$89.99
87786155/8"18-11/16" (475 mm)3-15/16" (100 mm)$89.99
87786195/8"21-5/8" (550 mm)3-15/16" (100 mm)$89.99
87786235/8"24-5/8" (625 mm)3-15/16" (100 mm)$99.99
87786275/8"27-9/16" (700 mm)3-15/16" (100 mm)$109.99
87786315/8"30-1/2" (775 mm)3-15/16" (100 mm)$109.99
33895175/8"36-7/16" (925 mm)3-15/16" (100 mm)$89.99
21865663/4"15-3/4" (400 mm)3-15/16" (100 mm)$79.99
21865073/4"18-11/16" (475 mm)3-15/16" (100 mm)$79.99
21864863/4"21-5/8" (550 mm)3-15/16" (100 mm)$79.99
21860303/4"24-5/8" (625 mm)3-15/16" (100 mm)$79.99
21860133/4"27-9/16" (700 mm)3-15/16" (100 mm)$99.99
21859933/4"30-1/2" (775 mm)3-15/16" (100 mm)$99.99

Measure the door itself, top edge to bottom edge, not the frame and not the size on the paperwork. Lengths and cut-offs are from HOPPE's HLS 9000 hardware catalog, Edition 7.

Choose with confidence

How to measure

Measure with the door open. Each measurement is one choice in the version table.

Backset: from the faceplate face to the center of the square handle spindle hole
01

Backset

Open the door. Measure from the face of the metal strip on the door edge to the center of the square handle spindle hole.

Choose 1-3/8", 1-3/4", 2-3/8".
PZ: from the center of the handle spindle hole to the center of the cylinder hole
02

Handle spacing (PZ)

Measure from the center of the square handle spindle to the center of the key cylinder hole.

Must be 3-5/8" (92 mm).

Not sure? Send us your measurements or a photo and we reply by email within 1 business day.

Handle sets for this lock

Matched on the lock family and handle spacing; check the fit before you order. Scroll sideways for more.

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 1-3/8" (35.6 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $149.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Dallas door handle set, 1-1/2" (38 mm) plate
Door
Fixed handles (second door) / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $169.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Verona door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $169.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $159.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Ródos door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $159.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 2-3/16" (55 mm) wide plate
Door
Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $229.99Free US shipping

Optional

Replacing your handles too?

Most repairs keep the handles already on the door. If yours are worn or you want a new look, any HOPPE HLS 9000 swing-door handle set fits this gearbox: same 3-5/8" (92 mm) handle-to-cylinder spacing and 8 mm spindle. HOPPE makes these sets for a 1-3/4" thick door; main-door versions shown. Thicker door? Ask us.

Accessories and matching parts

Strikes, extensions, cylinders and small parts from the manufacturers' catalogs and fit rules. Scroll sideways for more.

Cover plate for the seam between extensions (or between the gear and top extension)

Latch & deadbolt strike for the center of this lock · check the fit

Frame strikes for the shootbolt bolts on this lock · check the fit

Complete lock: this gear + middle extension + top extension. Hoppe sells them separately; pick the same faceplate width.

Complete lock: this gear + middle extension + top extension. Hoppe sells them separately; pick the same faceplate width.

Plan the repair

How it is replaced

About 20 minutes. Keep the door open until every locking point has been tested.

Time and toolsAbout 20 minutes

A hand Phillips screwdriver, hex keys (often 3 mm on HOPPE) and a board to lay the old and new parts side by side.

  1. Open and unlock

    Thumb-turn or key back first, then the handle down. The door stays open until the last step.

  2. Cylinder and handles out

    Remove the long screw in the door edge below the deadbolt, turn the key until the cylinder slides out, then undo the handle screws and pull out the square spindle.

  3. Free the gearbox

    Remove the faceplate screws, then undo the joint between the gearbox and the extension above it. Ease the gearbox down and out.

  4. Compare old and new

    On a board, handle holes lined up: backset, faceplate width, deadbolt throw and round bolt height must agree. Latch facing the wrong way? Pull it out, turn it half a turn, let it spring back, and turn the trigger to match.

  5. Fit the new gearbox

    Slide it in, hook the extension's drive rail into it so the teeth mesh fully, and refasten the joint. Faceplate screws go in hand-tight, heads flush.

  6. Refit and test, door open

    Spindle, handles, cylinder. Hold in the trigger, lift the handle and turn the thumb-turn: every bolt should move freely and go back in. Only then close the door.

Four don'ts
  • No power driver. Too much force binds the drive rail.
  • Leave every Torx or tri-wing screw in the gearbox body: they hold the case together under spring pressure.
  • Don't overtighten: hand-tight, heads flush.
  • Don't close the door until the lock has passed the door-open test.

These steps follow Therma-Tru's installation packet for the HOPPE HLS 9000 and HOPPE's hardware catalog.

The Shootbolt difference

A better part. A little peace of mind.

Free US shipping

In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.

Shipping details ↗

90-day free returns

A prepaid return label and no restocking fee. Time to check your part and plan the repair.

Returns details ↗

Fit Guarantee

We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.

How the guarantee works ↗

Questions

Will a new gearbox fix a drooping handle?

Usually, when the droop is in the gearbox. Take the inside handle off and push the bare square spindle down: if it stays down, a worn gearbox is the likely cause on a HOPPE lock; if it springs back level, the handle set is the part. If only the case has failed and the faceplate and lower round bolt are fine, the gearbox only (lock case) is the smaller repair.

Is this the whole lock?

No, the HOPPE HLS 9000 gearbox with lower round bolt and shootbolt is the main lock body. HOPPE sells the gear and the top extension separately, and this shootbolt version also needs a middle extension. Handles, cylinder and strikes are separate.

How do I tell it from the Roundbolt gear without a shootbolt?

The HOPPE HLS 9000 gearbox with lower round bolt and shootbolt has a shootbolt; its round bolt is 11-9/16" (294 mm) up from the door bottom. The HOPPE gearbox with lower round bolt, bolt 9-11/16" (246 mm) up from door bottom has no shootbolt and its round bolt at 9-11/16" (246 mm).

Which part number goes with each backset?

For the HOPPE HLS 9000 gearbox with lower round bolt and shootbolt: 1-3/8" (35 mm) is 8778751, 1-3/4" (45 mm) is 8778755 and 2-3/8" (60 mm) is 2485283. Measure from the faceplate face to the handle hole center.

Does lifting the handle extend the deadbolt?

No, on the HOPPE HLS 9000 gearbox with lower round bolt and shootbolt, lifting the lever engages the multipoint. Turn the thumb-turn or key to extend the deadbolt. To unlock, turn the thumb-turn back, then push the lever down.

Why does HOPPE list 24-7/16"?

HOPPE lists the round bolt on the HLS 9000 gearbox with lower round bolt and shootbolt from the center of the handle hole down: 24-7/16" (620 mm). From the bottom of the door it is 11-9/16" (294 mm), the easiest check on a fitted door.

No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.

Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.

Help identify my part

Send the part number, measurements or photos of your old hardware. We’ll review your request and reply by email within 1 business day.

Your photos are stored privately and used to help identify your part. Privacy policy