Length & locking points
Measure your old extension end to end. HOPPE gives each bolt's height from the center of the handle, so measure from the handle center up to the middle of each bolt.
Shop by part type
Replacement partsGearboxesExtension rodsStrike platesFrench door flush boltsSpindles & small partsEuro cylindersView all replacement partsComplete locks & hardware
Complete locksSingle-point locksHandle setsSliding patio door handle setsAdjustable hingesShop by brand
HOPPEHOPPE gearbox (lock case only)Start with a symptom
Handle droops or won't liftDoor won't lock at the top or bottomLatch doesn't catch the frameSecond door of a pair won't lockKey turns stiffly or spinsIdentify your part
Have a stamped number? Start there. Look along the door edge.
Search a stamped numberInstant identifierHow to measureView all partsMultipoint locks, made simple.
Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details
90-day free returnsPrepaid return label, no restocking fee.
Estimated delivery: 8–10 business daysBackordered · ships in 7 business days
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
Specifications / a quick match
Start with the part you have. Find the version that matches.
This middle extension with round bolt (roundbolt) is a section of the drive rail that attaches to the gear to reach the height of the door and carries a round bolt locking point. HOPPE calls this the Extension. In the installed lock it sits between the gear and the top extension. Pick by length and bolt height. Shootbolt locks add a middle extension; the shootbolt is on the top extension.
The assembly as listed. The gearbox and frame strikes are sold separately.
Run the checks under "Is it my part?" below before you order.
Codes and descriptions the manufacturer and sellers use for this product family. Search any of them to find the part.
3537057 · 8778739 · 8778743 · 8778747 · Roundbolt + Shootbolt / M / 1141 / RB1 / 1050 / 16-SC / K/ZC · Roundbolt + Shootbolt / M / 1591 / RB1 / 1500 / 16-SC / K/ZC · Roundbolt + Shootbolt / M / 466 / RB1 / 375 / 16-SC / K/ZC · Roundbolt + Shootbolt / M / 691 / RB1 / 600 / 16-SC / K/ZC
Is it my part?
5 checks before you order. Match all of them to one row of the version table.
The repair
If one bolt is bent, broken or stuck while the others move, the extension that carries it is often the part to replace. A drooping handle usually points to the gearbox instead. If only the case has failed on a manual lock, the HOPPE gearbox (lock case only) fits onto the faceplate strip you have.
REPLACEThis extensionOne section of the lock, sold on its own, without the gearbox or strikes.
REUSEThe gearbox, strikes and handlesThe new extension has to match the gearbox you keep: the same faceplate width, 5/8" (16 mm) or 3/4" (20 mm), the same bolt type, and automatic with automatic.
Where it sits. On HOPPE HLS 9000 locks with a shootbolt at the top, a middle extension goes between the gearbox and the top extension, which carries the shootbolt. HOPPE's catalog lists no cut-off for middle extensions, so order by length.
4 available versions
Match the measurements on your existing part, not just its looks. Read across one row.
4 versions
Swipe the table sideways to see part numbers, prices and Choose buttons.
| Length & locking points | Door heights it reaches | Part number | Price | Select version |
|---|---|---|---|---|
| 18-3/8" (466 mm) – 1 roundbolt at 14-3/4" above handle | Not listed | 3537057 | On request | |
| 27-3/16" (691 mm) – 1 roundbolt at 23-5/8" above handle | 76-5/8" to 95-5/16" (1946 to 2421 mm) 97-5/16" to 101-1/4" (2471 to 2571 mm) | 8778739 | $139.99 | |
| 44-15/16" (1141 mm) – 1 roundbolt at 41-5/16" above handle | 94-5/16" to 113-1/16" (2396 to 2871 mm) 115" to 118-15/16" (2921 to 3021 mm) | 8778743 | $149.99 | |
| 62-5/8" (1591 mm) – 1 roundbolt at 59-1/16" above handle | 112-1/16" to 130-3/4" (2846 to 3321 mm) 132-11/16" to 136-5/8" (3371 to 3471 mm) | 8778747 | $119.99 |
Door heights are for the whole lock with its gearbox, with the handle 36" (914 mm) up from the bottom of the door, as HOPPE lists them; they are the same figures the door-height box on the gearbox page uses. Measure the door itself, top edge to bottom edge. Its gearbox: HOPPE gearbox with lower round bolt and shootbolt, bolt 11-9/16" (294 mm) up.
Choose with confidence
It is one choice in the buy box and the version table.
Measure your old extension end to end. HOPPE gives each bolt's height from the center of the handle, so measure from the handle center up to the middle of each bolt.
Not sure? Send us your measurements or a photo and we reply by email within 1 business day.
Strikes, extensions, cylinders and small parts from the manufacturers' catalogs and fit rules.
Cover plate for the seam between extensions (or between the gear and top extension)
The gear (lock body with the handle and key) this extension attaches to. Pick the same faceplate width.
The Shootbolt difference
In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.
Shipping details ↗A prepaid return label and no restocking fee. Time to check your part and plan the repair.
Returns details ↗We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.
How the guarantee works ↗Written from the manufacturers' own catalogs and installation sheets.
No, the HOPPE HLS 9000 middle extension with round bolt is one section of a shootbolt lock. Shootbolt locks add a middle extension to the gear and top extension; the shootbolt is on the top extension, and a cover plate covers the seam.
No, a HOPPE HLS 9000 round bolt section at the top of the lock is a top extension: see HOPPE top extension with round bolt, 5/8" (16 mm) faceplate. The middle extension with round bolt sits between the gear and the top extension.
On the HOPPE HLS 9000 middle extension with round bolt, measure upward from the center of the handle hole to the round bolt, never from the bottom of the door. HOPPE lists 14-3/4" (375 mm) to 59-1/16" (1500 mm), by version.
For the HOPPE HLS 9000 middle extension with round bolt: 3537057 is 18-3/8" (466 mm), 8778739 is 27-3/16" (691 mm), 8778743 is 44-15/16" (1141 mm) and 8778747 is 62-5/8" (1591 mm) overall.
No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.
Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.