Free US shipping90-day free returns · prepaid labelFit Guarantee · how it works
Shootbolt Instant identifierIdentify part
HOPPE gearbox with lower roller, automatic: dimension drawing
HOPPE gearbox with lower roller, automatic: full drawing with the side view
Complete lock: this part with its matching pieces
1 / 3
HOPPE HLS 9000Part no. —

HOPPE gearbox with lower roller, automatic

$169.99–$189.99
Backset
Deadbolt throw

Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details

90-day free returnsPrepaid return label, no restocking fee.

Estimated delivery: 8–10 business daysBackordered · ships in 7 business days

  • Visa
  • Mastercard
  • American Express
  • Discover
  • PayPal
  • Apple Pay
  • Google Pay

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Specifications / a quick match

Specs & what's included

Start with the part you have. Find the version that matches.

What this part is

This multipoint gearbox with lower roller holds the hub the handle turns and the deadbolt, with a single roller lower on the faceplate. HOPPE calls this the Gear, or lockcase. The multipoint engages by itself when the door closes; a manual gear needs the lever lifted. Pick by backset and deadbolt throw. HOPPE sells the gear and top extension separately.

A HOPPE HLS 9000 gearbox (the case behind the handle), already attached to the lower extension with a roller. The top extension, handles, key cylinder and frame strikes are sold separately.

Check the system, too.

This is one of 15 HOPPE HLS 9000 gearboxes, and they do not swap with each other. Run the checks under "Is it my part?" below before you order.

Brand & series
HOPPE · HLS 9000
Part supplied
HOPPE gearbox + lower extension with a roller. Top extension separate.
Backset
  • 1-3/8″ 35 mm
  • 1-3/4″ 45 mm
Deadbolt throw
  • 9/16″ 14 mm
  • 1″ 25.4 mm
Lower locking point, up from door bottom
6-7/16" (164 mm) from the bottom of the door to the center of the roller.
Lower locking point, below handle center
29-1/2" (750 mm) down from the center of the handle hole to the center of the roller.
Operation
Automatic: the multipoint engages by itself when the door closes. Turn the thumb-turn to lock.
Faceplate width
5/8" (16 mm), across the face of the metal strip on the door edge.
Assembly
HOPPE sells the gear and the top extension separately. Handles, cylinder and strikes are separate products.
Maximum cut-off
2-3/8" (60 mm)
Handle-to-cylinder centers (PZ)
3-5/8″ (92 mm)
Handle height
36″ (914 mm) up from the door bottom
Gear length
37-5/8″ (955 mm)
Not included
  • Top extension
  • Handles & spindle
  • Cylinder & strikes
Manufacturer catalog codes (13)

Codes and descriptions the manufacturer and sellers use for this product family. Search any of them to find the part.

gearbox · gear box · lock case · lock body · multipoint gearbox · 8778251 · 8778275 · 8778295 · 8778307 · Automatic Two Roller / A/35/14 / 914 / RL1 / 750 / 16-SC / 60 · Automatic Two Roller / A/35/25 / 914 / RL1 / 750 / 16-SC / 60 · Automatic Two Roller / A/45/14 / 914 / RL1 / 750 / 16-SC / 60 · Automatic Two Roller / A/45/25 / 914 / RL1 / 750 / 16-SC / 60

Is it my part?

How to tell if this is your part

6 checks with the door open. Match all of them to one row of the version table.

What to check

  1. Have the part number, from the box label or the door's paperwork? Match it to the version table.
  2. Check that the multipoint engages by itself when the door closes; a manual gear needs the lever lifted. Check for a single roller below the handle; the deadbolt is level with the handle.
  3. Measure the backset from the face of the lock faceplate to the center of the handle hole. Pick 1-3/8" (35 mm) or 1-3/4" (45 mm).
  4. Measure how far the deadbolt sticks out past the faceplate when it is locked. Pick 9/16" (14 mm) or 1" (25.4 mm).
  5. Measure from the bottom of the door up to the center of the roller: 6-7/16" (164 mm). HOPPE lists this as 29-1/2" (750 mm) below the handle center.
  6. Check the shared sizes: faceplate 5/8" (16 mm) across the metal strip, with square ends; handle height 36" (914 mm) from the door bottom to the handle hole center; PZ 3-5/8" (92 mm).

This isn't your part if

The complete lock: this gearbox with its matching pieces
HOPPE HLS 9000 · gearbox with lower roller, automatic
THE LOWER PIECE OF A TWO-PIECE LOCK.

The repair

When this is the part to replace

A handle that droops, won't spring back up or needs force to lift, and a key that turns stiffly, usually point to the gearbox rather than to the bolts.

REPLACEThe gearbox on its lower extensionThe case behind the handle, already attached to the lower extension with a roller.

REUSEThe rest of your lock, if undamagedYour top extension, handles, key cylinder and frame strikes can stay on the door. Each is sold separately if it needs replacing.

Check first: it may not be the gearbox.
  • Loose is not drooping. A handle that wobbles but springs back level needs its set screw tightened, often with a 3 mm hex key.
  • Push the bare spindle. With the inside handle off, push the square spindle down and let go. If it springs back level, the handle set is the part, not this one.

4 available versions

Versions, part numbers and prices

Match the measurements on your existing lock, not just its looks. Read across one row.

4 versions

Swipe the table sideways to see part numbers, prices and Choose buttons.

Read across one row. Choose a row to update the buy box.
BacksetDeadbolt throwPart numberPriceSelect version
1-3/8" (35 mm)9/16" (14 mm)8778275$189.99
1-3/8" (35 mm)1" (25.4 mm)8778251$189.99
1-3/4" (45 mm)9/16" (14 mm)8778307$169.99
1-3/4" (45 mm)1" (25.4 mm)8778295$189.99

Match your measurements, then choose a version.

The whole lock, by door height

Door heights this lock reaches

This gearbox is the lower piece of a two-piece lock: gearbox + top extension. The door-height box by the price picks the top extension from your door's measured height; this table is the same answer in print.

HOPPE's rule: the two pieces together are as long as the door is tall, with the handle 36" (914 mm) up from the bottom of the door. Each row is the range of door heights HOPPE prints for that top extension. Where two rows reach the same door, the right one puts its locking points where the strike plates already sit in your frame.

Part no.LengthLocking points above the handle centerDoor heights it reachesPrice
877851541-1/8" (1045 mm)1 roller at 28-3/4"71-1/16" to 78-3/4" (1805 to 2000 mm)$69.99
877851948-1/16" (1220 mm)1 roller at 36-5/8"71-1/16" to 85-5/8" (1805 to 2175 mm)$99.99
877852354-15/16" (1395 mm)1 roller at 44-11/16"79-1/8" to 92-1/2" (2010 to 2350 mm)$109.99
877852761-13/16" (1570 mm)1 roller at 50-9/16"79-1/8" to 99-7/16" (2010 to 2525 mm)$79.99
877853168-11/16" (1745 mm)1 roller at 50-9/16"88-3/4" to 106-5/16" (2255 to 2700 mm)$149.99

Measure the door itself, top edge to bottom edge, not the frame and not the size on the paperwork. Door heights are the range HOPPE gives for each top extension, the same figures the door-height box uses.

Choose with confidence

How to measure

Measure with the door open. Each measurement is one choice in the version table.

Backset: from the faceplate face to the center of the square handle spindle hole
01

Backset

Open the door. Measure from the face of the metal strip on the door edge to the center of the square handle spindle hole.

Choose 1-3/8", 1-3/4".
Throw: how far the deadbolt sticks out past the faceplate
02

Throw

Lock the door while it's open and measure how far the bolt sticks out past the faceplate.

Choose 9/16" (14 mm) or 1" (25.4 mm).
PZ: from the center of the handle spindle hole to the center of the cylinder hole
03

Handle spacing (PZ)

Measure from the center of the square handle spindle to the center of the key cylinder hole.

Must be 3-5/8" (92 mm).

Not sure? Send us your measurements or a photo and we reply by email within 1 business day.

Handle sets for this lock

Matched on the lock family and handle spacing; check the fit before you order. Scroll sideways for more.

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 1-3/8" (35.6 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $149.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Dallas door handle set, 1-1/2" (38 mm) plate
Door
Fixed handles (second door) / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $169.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Verona door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $169.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $159.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE Ródos door handle set, 1-1/4" (31 mm) narrow plate
Door
Fixed handles (second door) / Keyed set (main door) – cylinder not included / Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – cylinder not included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $159.99Free US shipping

Handle sets that fit this lock (3-5/8" / 92 mm PZ) · check the fit

HOPPE · Handle set
HOPPE München door handle set, 2-3/16" (55 mm) wide plate
Door
Keyed set (main door) – keyed cylinder included / Thumbturn set, no key outside (second door) – thumb-turn half cylinder included
Lock family
HLS 9000
From $229.99Free US shipping

Optional

Replacing your handles too?

Most repairs keep the handles already on the door. If yours are worn or you want a new look, any HOPPE HLS 9000 swing-door handle set fits this gearbox: same 3-5/8" (92 mm) handle-to-cylinder spacing and 8 mm spindle. HOPPE makes these sets for a 1-3/4" thick door; main-door versions shown. Thicker door? Ask us.

Accessories and matching parts

Strikes, extensions, cylinders and small parts from the manufacturers' catalogs and fit rules. Scroll sideways for more.

Latch & deadbolt strike for the center of this lock · check the fit

Frame strikes for the automatic bolts on this lock · check the fit

Frame strikes for the automatic bolts on this lock · check the fit

Complete lock: this gear + top extension. Hoppe sells them separately; pick the same faceplate width.

HOPPE · Top/bottom assembly
HOPPE top extension with roller, automatic
Bolt type
Roller
Faceplate width
5/8" (16 mm)
Operation
Locks as the door closes
From $69.99Free US shipping

Frame strikes for the roller bolts on this lock · check the fit

The Shootbolt difference

A better part. A little peace of mind.

Free US shipping

In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.

Shipping details ↗

90-day free returns

A prepaid return label and no restocking fee. Time to check your part and plan the repair.

Returns details ↗

Fit Guarantee

We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.

How the guarantee works ↗

Questions

Will a new gearbox fix a drooping handle?

Usually, when the droop is in the gearbox. Take the inside handle off and push the bare square spindle down: if it stays down, a worn gearbox is the likely cause on a HOPPE lock; if it springs back level, the handle set is the part.

Is this the whole lock?

No, the HOPPE HLS 9000 automatic gearbox with lower roller is the main lock body. HOPPE sells the gear and the top extension separately; together they make the complete lock. Handles, cylinder and strikes are separate products.

It is called Two Roller. Why does it have a single roller?

The HOPPE HLS 9000 Automatic Two Roller gear carries a single roller below the handle. HOPPE puts the second roller on the top extension, which is sold separately.

My handle must be lifted to lock. Is this my gear?

No, the HOPPE HLS 9000 automatic gearbox with lower roller engages the multipoint by itself when the door closes. A roller gear that needs the lever lifted is the HOPPE gearbox with lower roller, 6-7/16" (164 mm) up from door bottom.

Where is the lower roller?

On every HOPPE HLS 9000 automatic gearbox with lower roller, the center of the roller is 6-7/16" (164 mm) up from the bottom of the door. HOPPE lists the same point as 29-1/2" (750 mm) below the center of the handle hole.

What if the locking point below my handle is a tongue?

An automatic HOPPE HLS 9000 gear with a tongue below the handle is a different part: see HOPPE gearbox with lower tongue, automatic. The automatic gearbox with lower roller has a roller there.

No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.

Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.

Help identify my part

Send the part number, measurements or photos of your old hardware. We’ll review your request and reply by email within 1 business day.

Your photos are stored privately and used to help identify your part. Privacy policy