Length & locking points
Measure your old extension end to end. HOPPE gives each bolt's height from the center of the handle, so measure from the handle center up to the middle of each bolt.
Shop by part type
Replacement partsGearboxesExtension rodsStrike platesFrench door flush boltsSpindles & small partsEuro cylindersView all replacement partsComplete locks & hardware
Complete locksSingle-point locksHandle setsSliding patio door handle setsAdjustable hingesShop by brand
HOPPEHOPPE gearbox (lock case only)Start with a symptom
Handle droops or won't liftDoor won't lock at the top or bottomLatch doesn't catch the frameSecond door of a pair won't lockKey turns stiffly or spinsIdentify your part
Have a stamped number? Start there. Look along the door edge.
Search a stamped numberInstant identifierHow to measureView all partsMultipoint locks, made simple.
Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details
90-day free returnsPrepaid return label, no restocking fee.
Estimated delivery: 8–10 business daysBackordered · ships in 7 business days
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
Specifications / a quick match
Start with the part you have. Find the version that matches.
This top extension with roller is the upper section of the drive rail on a HOPPE HLS 9000 automatic lock: it attaches to the gear, reaches up the door and carries one roller. HOPPE calls this the Extension. Pick by locking point height, measured up from the center of the handle hole, then length. Combine the top extension with the gear for a complete lock.
The assembly as listed. The gearbox and frame strikes are sold separately.
Run the checks under "Is it my part?" below before you order.
Codes and descriptions the manufacturer and sellers use for this product family. Search any of them to find the part.
8778515 · 8778519 · 8778523 · 8778527 · 8778531 · Automatic Two Roller / A / 1045 / RL1 / 730 / 16-SC / 276 · Automatic Two Roller / A / 1220 / RL1 / 930 / 16-SC / 251 · Automatic Two Roller / A / 1395 / RL1 / 1135 / 16-SC / 221 · Automatic Two Roller / A / 1570 / RL1 / 1285 / 16-SC / 246 · Automatic Two Roller / A / 1745 / RL1 / 1285 / 16-SC / 421
Is it my part?
5 checks before you order. Match all of them to one row of the version table.
The repair
If one bolt is bent, broken or stuck while the others move, the extension that carries it is often the part to replace. A drooping handle usually points to the gearbox instead.
REPLACEThis extensionOne section of the lock, sold on its own, without the gearbox or strikes.
REUSEThe gearbox, strikes and handlesThe new extension has to match the gearbox you keep: the same faceplate width, 5/8" (16 mm) or 3/4" (20 mm), the same bolt type, and automatic with automatic.
Cut at the top when fitted. A HOPPE top extension is cut at the top when it is fitted, up to the maximum cut-off HOPPE lists for the version. The specifications above give it where HOPPE lists one.
5 available versions
Match the measurements on your existing part, not just its looks. Read across one row.
5 versions
Swipe the table sideways to see part numbers, prices and Choose buttons.
| Length & locking points | Maximum cut-off | Door heights it reaches | Part number | Price | Select version |
|---|---|---|---|---|---|
| 41-1/8" (1045 mm) – 1 roller at 28-3/4" above handle | 10-7/8" (276 mm) | 71-1/16" to 78-3/4" (1805 to 2000 mm) | 8778515 | $69.99 | |
| 48-1/16" (1220 mm) – 1 roller at 36-5/8" above handle | 9-7/8" (251 mm) | 71-1/16" to 85-5/8" (1805 to 2175 mm) | 8778519 | $99.99 | |
| 54-15/16" (1395 mm) – 1 roller at 44-11/16" above handle | 8-11/16" (221 mm) | 79-1/8" to 92-1/2" (2010 to 2350 mm) | 8778523 | $109.99 | |
| 61-13/16" (1570 mm) – 1 roller at 50-9/16" above handle | 9-11/16" (246 mm) | 79-1/8" to 99-7/16" (2010 to 2525 mm) | 8778527 | $79.99 | |
| 68-11/16" (1745 mm) – 1 roller at 50-9/16" above handle | 16-9/16" (421 mm) | 88-3/4" to 106-5/16" (2255 to 2700 mm) | 8778531 | $149.99 |
Door heights are for the whole lock with its gearbox, with the handle 36" (914 mm) up from the bottom of the door, as HOPPE lists them; they are the same figures the door-height box on the gearbox page uses. Measure the door itself, top edge to bottom edge. Its gearbox: HOPPE gearbox with lower roller, automatic.
Choose with confidence
It is one choice in the buy box and the version table.
Measure your old extension end to end. HOPPE gives each bolt's height from the center of the handle, so measure from the handle center up to the middle of each bolt.
Not sure? Send us your measurements or a photo and we reply by email within 1 business day.
Strikes, extensions, cylinders and small parts from the manufacturers' catalogs and fit rules.
The gear (lock body with the handle and key) this extension attaches to. Pick the same faceplate width.
The Shootbolt difference
In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.
Shipping details ↗A prepaid return label and no restocking fee. Time to check your part and plan the repair.
Returns details ↗We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.
How the guarantee works ↗Written from the manufacturers' own catalogs and installation sheets.
The HOPPE HLS 9000 automatic two roller top extension is the upper section only and combines with a gear for a complete lock; a cover plate covers the seam. For the gear, see HOPPE gearbox with lower roller, automatic.
On a HOPPE HLS 9000 automatic two roller top extension, measure from the center of the handle hole up to the roller, never from the bottom of the door: 28-3/4" (730 mm) on 8778515, 36-5/8" (930 mm) on 8778519, 44-11/16" (1135 mm) on 8778523, or 50-9/16" (1285 mm) on 8778527 and 8778531.
HOPPE top extension with roller, automatic is automatic with one roller on the extension. HOPPE top extension with roller, 5/8" (16 mm) faceplate is manual with one roller. HOPPE top extension with 2 rollers, manual is manual with 2 rollers on the extension.
HOPPE HLS 9000 automatic two roller top extensions 8778527 and 8778531 both have the roller 50-9/16" (1285 mm) above the handle. 8778527 is 61-13/16" (1570 mm) long and 8778531 is 68-11/16" (1745 mm); match the part number.
No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.
Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.