Length & locking points
Measure your old extension end to end. HOPPE gives each bolt's height from the center of the handle, so measure from the handle center up to the middle of each bolt.
Shop by part type
Replacement partsGearboxesExtension rodsStrike platesFrench door flush boltsSpindles & small partsEuro cylindersView all replacement partsComplete locks & hardware
Complete locksSingle-point locksHandle setsSliding patio door handle setsAdjustable hingesShop by brand
HOPPEHOPPE gearbox (lock case only)Start with a symptom
Handle droops or won't liftDoor won't lock at the top or bottomLatch doesn't catch the frameSecond door of a pair won't lockKey turns stiffly or spinsIdentify your part
Have a stamped number? Start there. Look along the door edge.
Search a stamped numberInstant identifierHow to measureView all partsMultipoint locks, made simple.
Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details
90-day free returnsPrepaid return label, no restocking fee.
Estimated delivery: 8–10 business daysBackordered · ships in 7 business days
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
Specifications / a quick match
Start with the part you have. Find the version that matches.
This middle extension with swing hook is a section of the drive rail that attaches to the gear to reach the height of the door and carries 1 or 2 swing hooks, by version. HOPPE calls this the Extension. In the installed lock it sits between the gear and the top extension, which carries the shootbolt. Pick by length, hook count and hook heights.
The assembly as listed. The gearbox and frame strikes are sold separately.
Run the checks under "Is it my part?" below before you order.
Codes and descriptions the manufacturer and sellers use for this product family. Search any of them to find the part.
3622868 · 3644160 · 3644178 · 3644186 · 3644194 · Swing Hook + Shootbolt / M / 1012 / SW1 / 900 / 16-SC / K/ZC · Swing Hook + Shootbolt / M / 1012 / SW2 / 500/900 / 16-SC / K/ZC · Swing Hook + Shootbolt / M / 1305 / SW2 / 600/1193 / 16-SC / K/ZC · Swing Hook + Shootbolt / M / 1612 / SW2 / 600/1500 / 16-SC / K/ZC · Swing Hook + Shootbolt / M / 612 / SW1 / 500 / 16-SC / K/ZC
Is it my part?
6 checks before you order. Match all of them to one row of the version table.
The repair
If one bolt is bent, broken or stuck while the others move, the extension that carries it is often the part to replace. A drooping handle usually points to the gearbox instead. If only the case has failed on a manual lock, the HOPPE replacement gearbox (lock case only) fits onto the faceplate strip you have.
REPLACEThis extensionOne section of the lock, sold on its own, without the gearbox or strikes.
REUSEThe gearbox, strikes and handlesThe new extension has to match the gearbox you keep: the same faceplate width, 5/8" (16 mm) or 3/4" (20 mm), the same bolt type, and automatic with automatic.
Where it sits. On HOPPE HLS 9000 locks with a shootbolt at the top, a middle extension goes between the gearbox and the top extension, which carries the shootbolt. HOPPE's catalog lists no cut-off for middle extensions, so order by length.
5 available versions
Match the measurements on your existing part, not just its looks. Read across one row.
5 versions
Swipe the table sideways to see part numbers, prices and Choose buttons.
| Length & locking points | Door heights it reaches | Part number | Price | Select version |
|---|---|---|---|---|
| 24-1/8" (612 mm) – 1 swing hook at 19-11/16" above handle | 73-1/2" to 92-3/16" (1867 to 2342 mm) 94-3/16" to 98-1/8" (2392 to 2492 mm) | 3622868 | $89.99 | |
| 39-13/16" (1012 mm) – 1 swing hook at 35-7/16" above handle | 89-1/4" to 107-15/16" (2267 to 2742 mm) 109-15/16" to 113-7/8" (2792 to 2892 mm) | 3644160 | $119.99 | |
| 39-13/16" (1012 mm) – 2 swing hooks at 19-11/16" & 35-7/16" above handle | 89-1/4" to 107-15/16" (2267 to 2742 mm) 109-15/16" to 113-7/8" (2792 to 2892 mm) | 3644178 | $139.99 | |
| 51-3/8" (1305 mm) – 2 swing hooks at 23-5/8" & 46-15/16" above handle | 100-13/16" to 119-1/2" (2560 to 3035 mm) 121-7/16" to 125-3/8" (3085 to 3185 mm) | 3644186 | $189.99 | |
| 63-7/16" (1612 mm) – 2 swing hooks at 23-5/8" & 59-1/16" above handle | 112-7/8" to 131-9/16" (2867 to 3342 mm) 133-9/16" to 137-1/2" (3392 to 3492 mm) | 3644194 | $149.99 |
Door heights are for the whole lock with its gearbox, with the handle 36" (914 mm) up from the bottom of the door, as HOPPE lists them; they are the same figures the door-height box on the gearbox page uses. Measure the door itself, top edge to bottom edge. Its gearbox: HOPPE gearbox with lower swing hook and shootbolt, 1" (25.4 mm) deadbolt throw.
Choose with confidence
It is one choice in the buy box and the version table.
Measure your old extension end to end. HOPPE gives each bolt's height from the center of the handle, so measure from the handle center up to the middle of each bolt.
Not sure? Send us your measurements or a photo and we reply by email within 1 business day.
Strikes, extensions, cylinders and small parts from the manufacturers' catalogs and fit rules.
Cover plate for the seam between extensions (or between the gear and top extension)
The gear (lock body with the handle and key) this extension attaches to. Pick the same faceplate width.
The Shootbolt difference
In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.
Shipping details ↗A prepaid return label and no restocking fee. Time to check your part and plan the repair.
Returns details ↗We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.
How the guarantee works ↗Written from the manufacturers' own catalogs and installation sheets.
No, the HOPPE HLS 9000 middle extension with swing hook is one section of a shootbolt lock. Shootbolt locks add a middle extension to the gear and top extension; the shootbolt is on the top extension: see HOPPE top extension with shootbolt, 3/4" (20 mm) throw.
No, a HOPPE HLS 9000 swing hook section at the top of the lock is a top extension: see HOPPE top extension with swing hook, 5/8" (16 mm) faceplate. The middle extension with swing hook sits between the gear and the top extension.
On the HOPPE HLS 9000 middle extension with swing hook, measure upward from the center of the handle hole to each swing hook, never from the bottom of the door. On a 2-hook version, match both heights in the version table.
HOPPE HLS 9000 middle extensions with swing hook 3644160 and 3644178 are both 39-13/16" (1012 mm) long. Measured up from the handle hole center, 3644160 has 1 hook at 35-7/16" (900 mm); 3644178 has 2, at 19-11/16" (500 mm) and 35-7/16" (900 mm).
No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.
Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.