Length & locking points
Measure your old extension end to end. HOPPE gives each bolt's height from the center of the handle, so measure from the handle center up to the middle of each bolt.
Shop by part type
Replacement partsGearboxesExtension rodsStrike platesFrench door flush boltsSpindles & small partsEuro cylindersView all replacement partsComplete locks & hardware
Complete locksSingle-point locksHandle setsSliding patio door handle setsAdjustable hingesShop by brand
HOPPEHOPPE gearbox (lock case only)Start with a symptom
Handle droops or won't liftDoor won't lock at the top or bottomLatch doesn't catch the frameSecond door of a pair won't lockKey turns stiffly or spinsIdentify your part
Have a stamped number? Start there. Look along the door edge.
Search a stamped numberInstant identifierHow to measureView all partsMultipoint locks, made simple.
Fit GuaranteeIf our instant part identifier says it fits and it doesn't, we pay the return. Details
90-day free returnsPrepaid return label, no restocking fee.
Estimated delivery: 8–10 business daysBackordered · ships in 7 business days
WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
Specifications / a quick match
Start with the part you have. Find the version that matches.
This top extension with swing hook is the upper section of the drive rail that attaches to the gear to reach the height of the door and carries 1 or 2 swing hooks. HOPPE calls this the Extension. A swing hook section between the gear and a top extension is a middle extension. Pick by part number first. Combine the top extension with the gear for a complete lock.
The assembly as listed. The gearbox and frame strikes are sold separately.
Run the checks under "Is it my part?" below before you order.
Codes and descriptions the manufacturer and sellers use for this product family. Search any of them to find the part.
3868770 · 3868796 · 3868809 · 3868817 · 3868825 · 3868833 · Swing Hook / M / 1058 / SW1 / 500 / 16-SC / 418 · Swing Hook / M / 1058 / SW1 / 900 / 16-SC / 18 · Swing Hook / M / 1388 / SW1 / 900 / 16-SC / 348 · Swing Hook / M / 1388 / SW2 / 500/900 / 16-SC / 348 · Swing Hook / M / 1745 / SW2 / 600/1193 / 16-SC / 412 · Swing Hook / M / 2270 / SW2 / 600/1500 / 16-SC / 630
Is it my part?
5 checks before you order. Match all of them to one row of the version table.
The repair
If one bolt is bent, broken or stuck while the others move, the extension that carries it is often the part to replace. A drooping handle usually points to the gearbox instead. If only the case has failed on a manual lock, the HOPPE HLS 9000 gearbox (lock case only) fits onto the faceplate strip you have.
REPLACEThis extensionOne section of the lock, sold on its own, without the gearbox or strikes.
REUSEThe gearbox, strikes and handlesThe new extension has to match the gearbox you keep: the same faceplate width, 5/8" (16 mm) or 3/4" (20 mm), the same bolt type, and automatic with automatic.
Cut at the top when fitted. A HOPPE top extension is cut at the top when it is fitted, up to the maximum cut-off HOPPE lists for the version. The specifications above give it where HOPPE lists one.
6 available versions
Match the measurements on your existing part, not just its looks. Read across one row.
6 versions
Swipe the table sideways to see part numbers, prices and Choose buttons.
| Length & locking points | Maximum cut-off | Door heights it reaches | Part number | Price | Select version |
|---|---|---|---|---|---|
| 41-5/8" (1058 mm) – 1 swing hook at 19-11/16" above handle | 16-7/16" (418 mm) | 62-13/16" to 79-1/4" (1595 to 2013 mm) | 3868770 | $109.99 | |
| 41-5/8" (1058 mm) – 1 swing hook at 35-7/16" above handle | 11/16" (18 mm) | 78-9/16" to 79-1/4" (1995 to 2013 mm) | 3868796 | $119.99 | |
| 54-5/8" (1388 mm) – 1 swing hook at 35-7/16" above handle | 13-11/16" (348 mm) | 78-9/16" to 92-1/4" (1995 to 2343 mm) | 3868809 | $129.99 | |
| 54-5/8" (1388 mm) – 2 swing hooks at 19-11/16" & 35-7/16" above handle | 13-11/16" (348 mm) | 78-9/16" to 92-1/4" (1995 to 2343 mm) | 3868817 | $129.99 | |
| 68-11/16" (1745 mm) – 2 swing hooks at 23-5/8" & 46-15/16" above handle | 16-1/4" (412 mm) | 90-1/16" to 106-5/16" (2288 to 2700 mm) | 3868825 | $159.99 | |
| 89-3/8" (2270 mm) – 2 swing hooks at 23-5/8" & 59-1/16" above handle | 24-13/16" (630 mm) | 102-3/16" to 126-15/16" (2595 to 3225 mm) | 3868833 | $179.99 |
Door heights are for the whole lock with its gearbox, with the handle 36" (914 mm) up from the bottom of the door, as HOPPE lists them; they are the same figures the door-height box on the gearbox page uses. Measure the door itself, top edge to bottom edge. Its gearbox: HOPPE gearbox with lower swing hook, 6-5/16" (161 mm) up from door bottom.
Choose with confidence
It is one choice in the buy box and the version table.
Measure your old extension end to end. HOPPE gives each bolt's height from the center of the handle, so measure from the handle center up to the middle of each bolt.
Not sure? Send us your measurements or a photo and we reply by email within 1 business day.
Strikes, extensions, cylinders and small parts from the manufacturers' catalogs and fit rules.
The gear (lock body with the handle and key) this extension attaches to. Pick the same faceplate width.
The Shootbolt difference
In-stock parts ship within 1 business day and arrive 1–3 business days after dispatch.
Shipping details ↗A prepaid return label and no restocking fee. Time to check your part and plan the repair.
Returns details ↗We stand behind our compatibility guide. If our instant part identifier says it fits and it doesn’t, we pay the return.
How the guarantee works ↗Written from the manufacturers' own catalogs and installation sheets.
No, the HOPPE HLS 9000 top extension with swing hook is one section of the lock. Combine the top extension with the gear for a complete lock.
On a HOPPE HLS 9000 top extension with 2 swing hooks, measure both hooks, not just the lowest. Measure upward from the center of the handle hole to each swing hook, never from the bottom of the door, and match both to the same version table row.
HOPPE HLS 9000 top extensions with swing hook 3868770 and 3868796 are 41-5/8" (1058 mm) long; the hook is 19-11/16" (500 mm) above the handle hole on 3868770 and 35-7/16" (900 mm) on 3868796. 3868809 has 1 hook, 3868817 has 2.
Pick the HOPPE HLS 9000 top extension with swing hook by part number when you can. Top extensions are cut at the top when fitted, so a fitted one can measure shorter than its table length. A measured length can match a shorter, wrong part.
A HOPPE HLS 9000 swing hook section between the gear and a top extension is a middle extension: see HOPPE middle extension with swing hook, 5/8" (16 mm) faceplate.
No reviews yet. We only publish reviews from verified buyers, collected 7 days after delivery.
Questions before you buy? Use the instant part identifier, or send us your measurements and photos and we reply by email within 1 business day.